Chipset                             

• Intel® G45 Chipset
• Supports FSB 800MHz, 1066MHz & 1333MHz               

Intel® ICH10 Chipset

• Hi-Speed USB (USB2.0) controller, 480Mb/sec, up to 10 ports
• 6 SATAII ports with transfer rate up to 3Gb/s
• PCI Master v 2.3, I/O APIC.
• ACPI 2.0 compliant
• Integrated AHCI controller                              

Main Memory                            

• Supports 4 unbuffered DIMM of 1.8 Volt DDR2 667/800 SDRAM, 16GB Max

Due to the High Performance Memory design, motherboards or system configurations may or may not operate smoothly at the JEDEC (Joint Electron Device Engineering Council) standard settings (BIOS Default on the motherboard) such as DDR2 voltage, memory speeds and memory timing. Please confirm and adjust your memory setting in the BIOS accordingly for better system stability.

Example: Kingston HyperX DDR2-800 PC6400 operates at 2.0V, 4-4-4-12.

For more information about specification of high performance memory modules, please check with your Memory Manufactures for more details.
                             

Slots                             

• One PCI Express 16X slot (PCI Express Bus SPEC V2.0 compliant)
• One PCI Express 1X slot (support PCI Express Bus specification v1.0a compliant)
• Two 32-bit v2.3 master PCI bus slots
• Support 3.3v/5v PCI bus interface                              

• On-Board IDE/SATA                             
• One Ultra DMA 66/100/133 IDE controller integrated in JMicron®368
• Supports PIO, Bus Master operation modes
• Can connect up to 2 Ultra ATA drives             
• SATAII controller integrated in ICH10 chipset
• Up to 3Gb/s transfer speed
• Supports six SATAII ports by ICH10                               

 Audio                            

• Chipset integrated by Realtek®ALC888
• Flexible 8-channel audio with jack sensing
• Compliant with Azalia 1.0 Spec
• Meet Microsoft Vista Premium spec                               

LAN                            

• Supports PCI Express LAN 10/100/1000 Fast Ethernet by Realtek 8111C                               

Internal I/O Connectors                               

• ATX 24-Pin power connector
• 4-pin ATX 12V power connector
• CPU x1/ System x1 FAN connectors
• CD-in connector
• Front panel audio connector
• Front panel connector
• 1 x chasis intrusion connector
• 3 x USB 2.0 connectors
• 1 x Floppy disk drive connector
• 6 x Serial ATAII connectors
• 1 x ATA133 connector
• 1 x SPDIF-Out connector
• Clear CMOS Jumper
• 1 x serial port connector
• 1 x IEEE1394 connector support additional 1 port (optional)
• 1 x TPM module connector                              

Back Panel I/O Ports                            

• 1 x PS/2 keyboard
• 1 x PS/2 mouse
• 1 x Parallel port
• 1 x 6 in 1 audio jack
• 4 x USB 2.0 ports
• 1 x RJ45 LAN jack
• 1 x Graphic Card port (optional)
• 1 x DVI-D port                               

Dimensions

• 9.6in.(L) x 9.6in.(W) mATX Form Factor