AHPLBW-10 specification sheet

Overview:

The Anycubic PLA Basic Filament 1kg in White is a dependable everyday filament for FDM 3D printer users who want consistent, trouble-free results. Neatly wound to prevent tangles and ensure smooth, uninterrupted feeding, it delivers precise extrusion with minimal bubbling so your prints come out clean from first layer to last. The bright white colour prints true and is well-suited to models, prototypes, and functional parts alike. A solid, straightforward choice for any FDM printer running 1.75mm PLA.

Description:

This Anycubic filament offers a reliable solution for high-quality printing with its 1.75mm diameter compatible with most standard machines. The white spool is designed to minimize tangles and ensure smooth feeding, resulting in bubble-free output and vibrant true-to-colour finishes ideal for prototypes and models.

Features:

Key Features:

• Compatible with FDM 3D printers using 1.75mm filament
• Includes a convenient 1kg spool weight for extended print runs
• Neatly wound design ensures consistent, tangle-free feeding
• Precise extrusion capability with bubble-free output
• High-quality PLA material widely supported and easy to print

Technical Specifications:

• Colour Code: White (#EFF0F1)
• Dry Out Before Use: Recommended
• Drying Condition: 45-50 degrees Celsius for 6-8 hours
• Nozzle Size: Recommended 0.2 mm or above
• Printing Temperature: 190-230 degrees Celsius
• Heated Bed Temperature: 55-56 degrees Celsius
• Recommended Printing Speed: 50-200 mm/s
• Cooling Time: 8 seconds
• Maximum Volume Speed (Flow Rate): 12 mm cubed per second
• Density: 1.24 g/cm cubed
• Melt Index: 4~10 g/10 min at 190 degrees Celsius /2.16 kg
• Melting Point Temperature: 166 degrees Celsius
• Vicat Softening Temperature: 55 degrees Celsius
• Heat Deflection Temperature (0.45MPa): 54 degrees Celsius
• Young's Modulus: 2534±85 Mpa
• Tensile Strength: 48±5 Mpa
• Elongation at Break: 8±1%
• Bending Modulus: 3360±100 Mpa
• Bending Strength: 90±3 MPa
• Izod Impact Strength (X-Y): 22±2 kJ/m squared
• Tensile Strength (Z): 26±1 MPa
• ACE Compatibility: Compatible

What's in the Box

• Anycubic PLA Basic Filament 1kg - White x1

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	AHPLBW-10
Colour Code	White (#EFF0F1)
Consumable Type	PLA Filament
Compatible With	FDM 3D Printers with 1.75mm filament compatibility
Dry Out Before Use	Recommended
Drying Condition	45-50 degreesC, 6-8 h
ACE Compatibility	Compatible
Nozzle Size	Recommended 0.2 mm or above
Printing Temperature	190-230 degreesC
Heated Bed Temperature	55-56 degreesC
Recommended Printing Speed	50-200 mm/s
Cooling Time	8 s
Maximum Volume Speed (Flow Rate)	12 mm³/s
Density	1.24 g/cm³
Melt Index	4~10 g/10 min (190 degreesC/2.16 kg)
Melting Point Temperature	166 degreesC
Vicat Softening Temperature	55 degreesC
Heat Deflection Temperature (0.45MPa)	54 degreesC
Young's Modulus	2534±85 Mpa
Tensile Strength	48±5 Mpa
Elongation at Break	8±1%
Bending Modulus	3360±100 Mpa
Bending Strength	90±3 MPa
lzod lmpact Strength (X-Y)	22±2 kJ/m²
Tensile Strength (Z)	26±1 MPa
Product Weight	1000g

FAQ

Is this filament compatible with my FDM printer?
This Anycubic PLA Basic Filament is designed for FDM 3D printers that accept 1.75mm filament, ensuring it works with a wide range of standard machines.

What are the recommended printing temperatures and speeds?
The optimal printing temperature range is 190-230 degreesC, while the heated bed should be set between 55-56 degreesC .; you can achieve reliable results with a recommended speed of 50-200 mm/s.

Do I need to dry the filament before using it?
Yes, drying is recommended for best results; store or heat the spool at 45-50 degreesC for 6-8 hours if you suspect moisture absorption prior to printing.

What nozzle size should I use with this filament?
We recommend using a nozzle size of 0.2 mm or larger to ensure smooth extrusion and prevent clogging during your print runs.

Is the spool prone to tangling during printing?
No, this filament is neatly wound specifically to prevent tangles and ensure consistent, uninterrupted feeding for trouble-free prints from start to finish.