Specifications:
| ©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications![]() | |
| Product Code | AJAX-DP-PLUS-INDR-B![]() |
| Compatibility | |
| Hubs | All Ajax hubs |
| Radio signal range extenders | All Ajax range extenders |
| Communication | |
| Jeweller communication technology | Proprietary wireless technology to transmit alarms and events. |
| Features: | |
| Two-way communication. | |
| Advanced anti-sabotage. | |
| Block encryption featuring a dynamic key. | |
| Instant notifications. | |
| Remote configuration via the Ajax apps. | |
| Radio frequency bands | 866.0 - 866.5 MHz |
| 868.0 - 868.6 MHz | |
| 868.7 - 869.2 MHz | |
| 905.0 - 926.5 MHz | |
| 915.85 - 926.5 MHz | |
| 921.0 - 922.0 MHz | |
| Maximum effective radiated power (ERP) | up to 20 mW |
| Radio signal modulation | GFSK |
| Radio communication range | up to 1,200 m |
| Between the detector and a hub (or radio signal range extender) in an open space. | |
| Calculate radio communication range at the facility | |
| Encrypted communication | All the data stored and transmitted are protected by block encryption with a dynamic key. |
| Frequency hopping | To prevent radio interference and radio signal interception. |
| Detection | |
| Sensitive elements | 1 x accelerometer |
| 1 x reed switch | |
| The magnet should be installed to the right of the detector. | |
| Maximum number of openings | up to 2,000,000 |
| For each reed switch. | |
| Additional detector connection | Third-party wired detector with the NC (normally closed) contact type. |
| Shock sensitivity | 3 levels |
| Adjusted by a PRO or user with admin rights in the Ajax app. | |
| Option to ignore single shock | Adjusted by a PRO or user with admin rights in the Ajax app. |
| Tilt sensor activation threshold | from 5° to 25° |
| Adjusted by a PRO or user with admin rights in the Ajax app. | |
| Recommendations | |
| Recommendations | The magnet is mounted to the right of the detector. It can be placed horizontally. |
| Do not install the detector with the LED indicator facing down, as this may cause it to fall and fail due to damage. | |
| Device is designed for indoor use only. | |
| Anti-sabotage protection | |
| Tamper alarm | Notifications of attempts to tear off the detector from the surface or remove it from the mounting panel. |
| Protection against spoofing | Device authentication |
| Power supply | |
| Power supply | 1 x CR123A battery |
| Up to 5 years of battery life. | |
| Enclosure | |
| Dimensions | Ø 20 x 90 mm |
| Weight | 29 g |
| Operating temperature range | from -10 °C to +40 °C |
| Operating humidity | up to 75% |
| Protection class | IP50 |
| Colours | |
| Colours | Black |
| White | |
| Complete set | |
| Complete set | DoorProtect Plus Jeweller |
| SmartBracket mounting panel | |
| CR123A battery (pre-installed) | |
| Big magnet | |
| Small magnet | |
| Terminal to connect a third-party detector | |
| Installation kit | |
| Quick Start Guide | |
Sold by ComX Computers