BDCOM-GP3600-16 specification sheet

Overview:

• BDCOM GP3600 complies with ITU-T G.984/G.988 and meets requirements about GPON OLT inNetwork Access Technical Requirements. It fully supports CTC2.0, automatic discovery and cooperation with ONUs of different manufacturers.
• BDCOM GP3600 supports the Asymmetric uplink 1.25Gbps/downlink 2.5Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users.
• Its coupling ratio ups to 1:128, and its support of different hybrid ONU networks minimize the carrier's investment.
• BDCOM GP3600, based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.

Features:

• GPON : Abiding by ITU-T G.984/G.988, BDCOM GP3600 series OLTmeets relevant requirements of GPON OLT regulated in Network Access Technical Requirementsand China Telecom GPON Technical Requirements-CTC2.0;
• SystemCapacity: GP3600 series supports maximum 16 GPON ports.
• Uplink Interface: GP3600 series with 4 gigabit SFP ports, 4 gigabit combo ports, and 4 10G SFP+ ports.
• Dimensions: 1U, occupies a small space.
• Environmental Protection: low power consumption and low operating cost.
• Bus Optical Fiber Protection: the link can be automatically switched when trouble occurs in the optical fiber;
• Power Characteristics: supports dual-AC, dual-DC and AC/DC power supply. The power supply supports modularized design, hot-swap and EMC-3 standard. It well adapts to the environment.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	BDCOM-GP3600-16
Attributes	GP3600-16
System Capacity	Maximum coupling ratio:1:128
	Backplane bandwidth:205G
	MAC table capacity: 64K
Interface PON	16
Interface Uplink interface	4 gigabit SFP slots, 4 gigabit TX/SFP combo ports
	4 10G SFP+ slots
Attributes of the PON Interface	The transmission rate with downlink 2.5Gbps/uplink 1.25Gbps
	Class B and Class C GPON module
	Security: ONU authentication mechanism
Standards	ITU-T G.984/G.988
	IEEE 802.1D, Spanning Tree
	IEEE 802.1Q, VLAN
	IEEE 802.1w, RSTP
	IEEE 802.3ad physical link static/dynamic aggregation (LACP)
	Ethernet - II
QoS	Backpressure flow control (half duplex)
	IEEE 802.3x flow control (full duplex)
	IEEE 802.1p, CoS
	WRR, SP and FIFO queue schedule
	Limiting the uplink/downlink rate based on each ONU
	DBA and SLA
VLAN	Port-based VLAN
	QinQ and flexible QinQ
Multicast	L2 multicast
	IGMP Snooping
	MLD Snooping
Layer-3 routing functions	Static routing, RIP and OSFP, OSFP/OSPFv3
Reliability	Unidirectional Link Detection (UDLD)
	Hot swap of the GPON optical module
	Optical path protection of GPON (type B/C, hand-in-hand)
	Abnormal luminescence ONU detection such as long luminescence
Network Security	Limiting the maximum number of users on each port
	Port isolation
	Packet storm control
	Flow-based ACL access control function
	Transmission data encryption on the PON interface
Configuration Management	Various management modes such as CLI, SNMP and telnet
	Conducting software upgrade through TFTP/FTP
	Debug output
Physical Characteristics	Dimensions mm (WxDxH): 442.5x304x 44
	Installation: standard 19-inch rack-mount
	Weight:5.25Kg
Environment	Operating environment: 0°C-45°C, 10%-85% non-condensation
	Storage environment: -40°C-80°C, 5%-95% non-condensation
Power supply	Input voltage: AC90~240V, DC 36 ~ 72V
	dual-power input, DC/AC power supply and hot-swap