BDCOM-S5864H specification sheet

In Stock (not confirmed) Enquire now!

Overview:

The S5800 Series (1U height) supports up to 1.28Tbps switching capacity and (48 SFP+ ports + 2 40GE ports + 4 100G ports or 72 10GE ports). S5800 Series supports BVSS, TRILL, SDN and FCoE/FC. Developed on the basis of BDROS 6 - a software platform designed by BDCOM with its own independent intellectual property rights. S5800 Series provides high-performance L2/L3/L4 switching capacity by integrating services such as IPv6, MPLS VPN, flow analysis, virtualization, and with highly sought after features including continuous forwarding, graceful restarting and loop network protection. S5800 Series supports "GreenTouch" architecture and "Smart@CHIP". Its power consumption is less than 200W.

Features:

Advanced Hardware Architecture Design & Industry Leading Processing Capacity

• It adopts the industry leading hardware architecture design. S5800 with 1U height supports 48 10G ports + 4 40G ports, or 64 10G ports.
• With high-performance ASIC switch chip and multi-core processor, S5800 Series supports up to 1.28Tbps switching capacity.
• S5800 Series is designed with front/back wind tunnels of the data center. It supports wind tunnel to switch between front-back mode and back-front mode.

Rich Data Center Services

• BVSS (BDCOM Virtual Switch System): S5800 Series supports BVSS, which can virtualize multiple physical devices into one in logic. The virtualized system is superior to the independent physical device in performance, reliability, flexibility and management.
• Doubled Performance : The virtualized system makes the best use of each link in the device and avoids the blocking of STP to the link.
• High-reliability : Based on the advanced distributed processing technique and the efficient function of cross-physical device link aggregation, S5800 Series provides with non-stop layer-3 routing forwarding and avoids single points of failure.
• Flexibility : With the function of S5800 virtual clusters, the distance of virtual cluster system can expand to 80KM, breaking the geographic restriction of traditional cluster technique.
• Easy Management : The whole virtual system realizes single IP unified management and simplifies the management of network device and network topology.
• Large Layer-2 Network Technique : S5800 Series adopts large layer-2 network technique which supports TRILL/SPB protocol. With the technique, the network structure has become simple and compress, which can access to data center large-scale servers.
• Unified Architecture : S5800 Series supports FCoE (FC over Ethernet) technique, which solves the problem of discrepancy between LAN network and FC storage network and integrates computing, data and storage networking.
• SDN : S5800 Series supportsSDN (Software Defined Network), which can realize network virtualization and centralized management.

Data Center Level High-reliability

• S5800 Series adopts HPS (Hitless Protection System). The key components of S5800 such as the power system and the fan system support redundancy design. All system modules support hot-swap and seamless switching without need of manual intervention.
• S5800 Series supports redundancy protection mechanism such as STP/RSTP/MSTP protocol, VRRP protocol, ring network protection, dual uplink active/standby link protection and LACP link aggregation.
• S5800 Series supports ISSU (In-Service Software Upgrade), guaranteeing the user data non-stop forwarding when the system is upgrading.
• S5800 Series supports BFD and realizes fault detection and service recovery in seconds through linking with layer-2 or layer-3 protocol.
• S5800 Series has perfect Ethernet OAM, 802.3ah, 802.1ag and ITU-Y.1731 which can real time monitor the network operating state and rapidly detect and locate the malfunction.
• High Reliability (99.999%): MTTR of S5800 Series is 50ms, meeting the requirement of the carrier-level service.

Comprehensive Service

• S5800 Series Supports complete layer-2 and layer-3 multicast routing protocol and meets the access requirement of IPTV, multi-terminal high-definition video monitoring and high-definition video meeting.
• S5800 Series supports complete layer-3 routing protocol and a super-large routing table capacity, which make super-large data center network, campus network, enterprise network and industry private networks available.
• S5800 Series supports complete MPLS VPN of layer-2 and layer-3, which meets the requirement of industry private VPN users and enterprise network VPN users.

Comprehensive IPv6 Solutions

• S5800 Series comprehensively supports IPv6 Neighbor Discovery, ICMPv6, Path MTU Discovery and DHCPv6.
• S5800 Series supports IPv6 based Ping, Traceroute, Telnet, SSH, ACL, meeting the need of IPv6 network equipment management and service control.
• S5800 Series supports IPv6 multicast characteristics including MLD, MLD Snooping and IPv6 layer-3 routing protocols including IPv6 static routing, RIPng, OSPFv3 and BGP4+.
• S5800 Series supports IPv4-to-IPv6 technologies including IPv6 manual/automatic tunnel, auto tunnel, IPv6-to-IPv4 tunnel, and ISATAP tunnel.

Comprehensive Security Mechanisms

• S5800 Series adopts advanced hardware architecture design, realizing the hierarchical scheduling and protection of the packet. It provides multiple security measures to defend against DOS or TCP attacks; and supports command line authority control based on user levels.
• Comprehensive Security Certification :S5800Series complies with IEEE 802.1x, Radius, and BDTacacs+.
• Enhanced Service Security Mechanism : S5800 Series supports the plaintext or MD5 authentication of relevant routing protocol; uRRF; DPI (Deep Packet Inspection) and (Deep Packet Filtration); DPI for control packets and data packets.

Innovative Green Environmental Design

• S5800 Series supports the "GreenTouch" architecture.
• Smart Power Management System : S5800 Series adopts advanced power system architecture design which can realize the function of efficient power switching, private power monitoring, soft start, real-time monitoring, intelligent adjustment and energy-saving.
• Smart Fan Management System : S5800 Series is designed with the intelligent fan and supports switching between front-back mode and back-front mode and fan automatic speed regulation.
• S5800 Series supports Efficient Ethernet and complies with International standard IEEE 802.3az.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	BDCOM-S5864H
Item	S5864
Switching Capacity	1.28Tbps
Packet Forwarding Rate	960Mpps
Power Slots	2
Fan Slots	5
Ports	48 10G SFP+ ports and 4 40G QSFP+ ports
	or 64 10G ports
Data Center Characteristics	BVSS
	TRILL/SPB large layer-2 technique
	FCoE technique
	SDN
MAC Switching Capacity	Static Configuration And Dynamically Learning Of MAC Address
	Check And Delete MAC Address
	MAC Address Aging Time
	Limit On MAC Address Learning Number
	MAC Address Filtering Function
	Black-Hole MAC Items
VLAN	4K VLAN entries
	GVRP
	1:1 and N:1 VLAN Mapping
	Basic Qinq And Selective Qinq
	Private VLAN
STP	802.1D (STP), 802.1W (RSTP), 802.1S (MSTP)
	BPDU protection, root protection and ring protection
Multicast	IGMP v1/v2/v3
	IGMP Snooping
	IGMP Fast Leave
	Multicast Group Policy And Multicast Number Limit
	Multicast Traffic Cross Vlan Duplication
	PIM-SM and PIM-DM
IPv4	Static Routing, RIP V1/V2, OSPF And BGP
	Policy Routing
	Load Balance Through Equal-Cost Routing
	BFD For OSPF And BGP
IPv6	ICMPv6, DHCPv6, ACLv6, IPv6 Telnet
	IPv6 Neighbor Discovery
	Path MTU Discovery
	MLD and MLD Snooping
	IPv6 static routing, RIPng, OSPFv3 and BGP4+
	Manual Tunnel, ISATAP Tunnel And 6-To-4 Tunnel
MPLS VPN	LDP protocol
	MCE
	P/PE of MPLS VPN
	MPLS Traffic Engineering (TE)
	MPLS Operations, Administration, and Maintenance (OAM)
QoS	Traffic Classification Of Each Field Of L2/L3/L4 Protocol Headers
	CAR Traffic Control
	802.1P/DSCP Priority Remark
	Multiple Queuing Algorithms Such As SP, WRR Or SP+WRR
	Tail-Drop, WRED
	Traffic Supervision And Traffic Shaping
Security Features	Identification And FiltrationOf L2/L3/L4 Based ACL
	Defend Against DOS Or TCP Attacks
	Suppression Of Broadcast, Multicast And Unknown Unicast Packet.
	Port Isolation
	Port Security, Ip+Mac+Port Binding
	Dhcp Snooping And Dhcp Option 82
	Ieee 802.1x Certification
	Radius And Bdtacacs+
	Urpf
	Command Line Authority Control Based On User Levels
Reliability	Power 1+1 Redundancy
	Power And Fan Hot Swap
	Static Lacp Link Aggregation And Cross Service Card Link Aggregation
	Ring Network Protection Including Eaps
	Vrrp And Hsrp
	Ethernet Oam 802.3ah/802.1ag/Itu-Y.1731
	Gr For Ospf And Bgp
	Bfd For Ospf And Bgp
	Issu
Management and Maintenance	Console, Telnet and SSH
	SNMP v1/v2/v3
	Upload And Download Of TFTP Files
	Remote Network Monitoring (RMON)
	Statistics Analysis Of Sflow, Netflow
Energy saving	IEEE 802.3az green Efficient Ethernet
Environment	Operating temperature/humidity:0°C-50°C, 10%-90% non-condensing
	Storage temperature/ humidity: -20°C-70°C, 5%-95% non-condensing
Power supply	AC: 100V-240V, 50Hz±10%
	DC: -36V~-72V
Dimensions mm (WxDxH)	442.5x404x44
	1U