CC-iTSRS1 specification sheet
Specifications for CC-iTSRS1
Intel BXTSRS1 LGA1700 Air Cooler top blow
![CC-iTSRS1 Gallery image 1 [Size: 480 (W) x 418 (H)]](i/intel/th200/th200_207570_IMG1.jpg)
Intel
Out of Stock View now!
R 239.00 inc VAT
Specifications:
| ©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications | |
| Product Code | CC-iTSRS1 |
| Overall Height | Up to 47mm (top of fan to bottom of heatsink) |
| Overall Size | Up to 100mm x 100mm |
| Mass | Up to 260g |
| Sound Power Level | 4.6 BA (max RPM, 40C inlet, 65W) |
| Sound Pressure Level | 36 dBA (max RPM, 40C inlet, 65W) |
| TDP Support | Up to 65W (Intel Pentium /Celeron Desktop Processors) |
| Fan Type | PWM controlled variable speed fan |
| Connector Type | 4-pin |
| Operating Voltage | 13.2V max, 12.0V rated, 10.8V min |
| Current (peak) | Up to 400mA |
| Max RPM (+/- 5%) | Up to 3150 RPM |
| Min RPM (+/- 20%) | 600 RPM |
| Operating Temp | 0 to 70C |
| Operating Humidity | 85% relative humidity @ 55C |
| Fan Protection | Locked-rotor/polarity protected |
| Sense Frequency | 2 pulses/Rev, 12V pull-up with 10Kohm |
| PWM Frequency | 25KHz +/- 5KHz |
| PWM Pull-up Voltage | 5.25V max |
| PWM Duty Cycle Range | 0-100% |
Sold by ComX Computers
Specifications are subject to change without notice. E&OE. Prices are a guide only, and are valid on 2026-10-19 only, subject to stock being available.
The specifications displayed above apply to the entire range and may not apply to this specific model. Kindly note that options cannot be changed for most models, and some options are not available in South Africa.