DS-3E1512HP-SI-8P2T2F specification sheet

Overview:

Hikvision DS-3E1512HP-SI-8P2T2F 8 Port Gigabit Smart PoE Switch
The Hikvision DS-3E1512HP-SI-8P2T2F is an 8 Port Gigabit Smart PoE Switch designed for reliable network connectivity and Power over Ethernet applications. It provides 8 Gigabit PoE ports, 2 Gigabit RJ45 ports and 2 Gigabit SFP fiber optical ports, making it suitable for IP cameras, wireless access points, VoIP equipment and other network devices. The switch offers a 130 W total PoE power budget, with high-power PoE support on ports 1 to 4 and extended transmission distances of up to 300 m on ports 1 to 8.

Description:

The Hikvision DS-3E1512HP-SI-8P2T2F combines Gigabit networking with smart PoE management in a durable metal housing. It is designed for installations where multiple powered network devices need to be connected through a single switch while maintaining reliable data transmission.

Ports 1 to 4 support up to 90 W per port using 802.3bt Hi-PoE, while ports 5 to 8 provide up to 30 W per port. With a total PoE power budget of 130 W, the switch can support a range of devices including high-power IP cameras and other PoE equipment.

The switch also supports VLAN, loop prevention, storm control and network management functions. Cable detection can help identify connection faults, while 6 kV surge protection adds an extra level of protection for connected network equipment.

Features:

Gigabit PoE Connectivity
The switch provides a practical combination of copper and fiber connectivity for surveillance and network installations:

• 8 x 10/100/1000 Mbps PoE ports
• 2 x 10/100/1000 Mbps RJ45 ports
• 2 x 10/100/1000 Mbps SFP fiber optical ports
• 130 W total PoE power budget
• Ports 1 to 4 support up to 90 W maximum port power
• Ports 5 to 8 support up to 30 W maximum port power
• PoE transmission distance of up to 300 m on ports 1 to 8

Smart Network Management
Designed for managed network environments, the Hikvision switch includes several functions that help improve network organisation and reliability. 802.1Q VLAN support allows network traffic to be separated into logical groups, while STP and RSTP help prevent network loops.

Additional network functions include:

• 802.1Q VLAN support
• STP and RSTP loop prevention
• Storm control
• SNMP support
• QoS support
• DHCP snooping
• Cable detection for locating connection faults

High Power PoE for IP Devices
With 802.3bt Hi-PoE support and up to 90 W available on an individual port, the DS-3E1512HP-SI-8P2T2F is suited to applications requiring more power than standard PoE switches can provide. The 130 W overall PoE budget provides flexibility when connecting several powered devices across the network.

The combination of Gigabit PoE ports and SFP fiber ports also makes this switch suitable for larger IP surveillance systems where copper connections are used for cameras and fiber links are required for network uplinks.

Reliable Construction and Protection
The metal material shell provides a robust enclosure for commercial and professional network installations. Built-in 6 kV surge protection helps protect the switch and connected devices against electrical surges, making it suitable for demanding network and CCTV environments.

Part Number / SKU
The part number for this Hikvision 8 Port Gigabit Smart PoE Switch is DS-3E1512HP-SI-8P2T2F. This SKU should be used when checking compatibility, ordering the product or matching it with an existing Hikvision network installation.

Suitable Applications
The DS-3E1512HP-SI-8P2T2F can be used in a range of professional networking and security installations, including IP surveillance systems, high-power IP cameras, wireless network deployments, VoIP equipment and other Gigabit Ethernet PoE applications.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	DS-3E1512HP-SI-8P2T2F
General
Shell	Metal material
Net Weight	2.7 kg (5.9 lb)
Gross Weight	2.9 kg (6.4 lb)
Dimensions (W x H x D)	335 mm x 44.5 mm x 175.8 mm (13.19'' x 1.75'' x 6.92'')
Operating Temperature	0 degreesC to 45 degreesC (0 degreesF to 113 degreesF)
Storage Temperature	-40 degreesC to 85 degreesC (-40 degreesF to 185 degreesF)
Operating Humidity	5% to 95% (no condensation)
Relative Humidity	5% to 95% (no condensation)
Power Supply	100-240V~ 50/60Hz 2.5A
Installation Mode	Desk-Mounted,Rack (equipped with mounting ears)
Max. Power Consumption	150 W
Power Consumption in Idle	20 W
Surge Protection	6 kV
Network Parameters
Ports	8 x Gigabit PoE port,2 x Gigabit RJ45 port,2 x Gigabit fiber optical port
MAC Address Table	8 K
Switching Capacity	Whole-Device Performance: 24 Gbps
	Port Performance: 24 Gbps
Packet Forwarding Rate	Whole-Device Performance: 17.86 Mpps
	Port Performance: 17.86 Mpps
Internal Cache	4.1 Mbits
Software Function
Long Range	Ports 1 to 8: up to 300 m.
	Long range performance may vary depend on camera model or cable condition.
Port Isolation	Ports 1 to 12: port isolation mode to improve network security
	Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog	Ports 1 to 8: auto detect and restart the cameras that do not respond.
Link Aggregation	Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
	Support static link aggregation.
	Support 8 aggregation groups.
Loop Prevention	Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
	Support 802.1D STP.
	Support 802.1w RSTP.
QoS	QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.
	Support port-based priority configuration.
	Support SP, WRR priority schedule mode.
VLAN	VLAN is used for network scale planning and network health improvement.
	Support 802.1Q.
	Configurable VLAN ID from 1-4094.
	Support Trunk, Access port mode.
	Support Max. 4094 VLAN.
HPP	Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
	1. Display the port rate.
	2. Display the port bandwidth utilization rate.
	3. Display the PoE power usage.
	4. Display topology information.
	5. Display the alarm status.
	6. Restart ports and devices.
	7. Enable port long-rage mode.
	8. Remotely upgrade the device.
System Maintenance	Support device management via web.
	Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
	Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
	Support management via Hik-Central Pro.
	Support remote management via Hik-Partner Pro.
	Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
	Support 802.1ab LLDP for peer device discovery.
	Support SNMP v1/v2c for third-party management platform access.
	Support port mirroring for fault locating.
Port Rate-Limiting	Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm Control	Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.
	Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
DHCP Snooping	DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
ACL	Support ACL definitions based on source/destination MAC address, source/destination IP address, IP protocol type.
	Support ACL application on ports.
	Support IPv4 ACL and MAC ACL configurations.
	Support inbound ACLs.
IPSG	IPSG can control the security of port access device.
	Support port, MAC, IP binding.
	Support 256 security entries.
PoE Power Supply
PoE Standard	Ports 1 to 4: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
	Ports 5 to 8: IEEE 802.3af, IEEE 802.3at
PoE Power Pin	Ports 1 to 4: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
	Ports 5 to 8: End-span: 1/2(-), 3/6(+)
Max. Port Power	Ports 1 to 4: 90 W
	Ports 5 to 8: 30 W
PoE Port	Hi-PoE: Ports 1 to 4
	PoE: Ports 5 to 8
PoE Power Budget	130 W
Approval
EMC	CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
Safety	CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemistry	CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)