DS-3WF1000-EI-2N specification sheet

Overview:

Reliable 2.4GHz Wireless Bridge for Long-Range Connectivity
The Hikvision DS-3WF1000-EI-2N wireless bridge kit is engineered for stable, long-distance data transmission over 2.4GHz. Designed for point-to-point and point-to-multipoint deployments, it delivers up to 300 Mbps throughput with a transmission range of up to 1 km under optimal conditions. Its integrated 7 dBi antenna and 2 x 2 MIMO technology ensure consistent signal strength, making it suitable for CCTV backhaul, remote network extension, and outdoor connectivity projects. With plug and play setup and intelligent management features, installation and operation remain straightforward even in demanding environments.

Description:

The DS-3WF1000-EI-2N wireless bridge kit provides a cost effective and efficient way to extend network connectivity without cabling. It supports long range wireless transmission up to 1 km, making it ideal for linking buildings, connecting remote cameras, or expanding network coverage in outdoor areas. The built in antenna enhances signal stability, while real time monitoring and alarm notifications improve operational awareness. Designed for durability, the unit features IP55 protection and operates reliably across a wide temperature range. Its compact form factor and pole mounting capability simplify deployment in various scenarios.

Features:

Key Performance Highlights

• Long range wireless transmission up to 1 km for flexible deployment
• Stable 300 Mbps wireless speed using IEEE 802.11b g n standard
• Integrated 7 dBi antenna with optimized beam coverage
• Plug and play setup reduces installation time
• Real time alarm push and topology visualization improve monitoring
• Designed for outdoor use with IP55 rated housing

Technical Summary and Core Details
The DS-3WF1000-EI-2N (Part Number DS-3WF1000-EI-2N) combines efficient wireless communication with practical hardware design. It operates within the 2400 MHz to 2483.5 MHz frequency band and supports channel widths of 10 20 and 40 MHz for adaptable performance. Transmission power reaches up to 22 dBm depending on regulatory limits, while receiving sensitivity ensures reliable connectivity even at extended distances.

Key technical elements include:

• Wireless standard IEEE 802.11b g n with 2 x 2 MIMO
• Maximum air interface rate up to 300 Mbps
• Throughput performance up to 90 Mbps at shorter distances and approximately 70 Mbps at 1 km
• Antenna beamwidth 60 degrees horizontal and 50 degrees vertical
• Security support via WPA2 PSK with hidden SSID capability

Hardware and Interface Design
This wireless bridge kit includes dual 10/100 Mbps RJ45 ports for network integration, along with LED indicators for power, LAN status, and signal strength. A hardware reset button allows quick restoration when needed. Power is supplied via 12 to 24 VDC passive PoE, enabling flexible installation without complex wiring.

Additional hardware details:

• Compact unit dimensions for easy mounting
• Lightweight design at 0.26 kg per device
• Pole mounting installation for outdoor deployment
• Efficient power consumption with low operating demand

Environmental and Deployment Capability
Built to handle challenging outdoor conditions, the unit supports operation in temperatures ranging from -30 C to 60 C. Its IP55 rating provides protection against dust and water ingress, ensuring consistent performance in exposed environments.

Environmental specifications include:

• Wide operating temperature and humidity tolerance
• Durable enclosure suited for outdoor networking
• Reliable storage conditions for varied climates

Management and Smart Control Functions
The system supports multiple management platforms, including web interface, iVMS-4200, and Hik Partner Pro. Advanced features such as topology visualization, signal monitoring, and spectrum scanning provide deeper insight into network performance.

Management capabilities include:

• Remote configuration of SSID, channel, and transmission power
• Real time signal and noise monitoring
• One click activation and device management
• System logging and firmware upgrades via multiple platforms

What is Included in the Kit
Each package is supplied as a paired solution for immediate deployment. The ??????? ensures that all necessary components are available for installation and operation.

Included items:

• Two wireless bridge units
• Two power adapters
• Two PoE injectors
• Mounting accessories and binding tape
• Quick start documentation

Application Use Cases
This wireless bridge is well suited for a variety of professional and commercial scenarios. It is commonly used for CCTV system extension, inter building network links, and remote site connectivity where running cables is impractical.

Typical applications:

• Surveillance camera backhaul over long distances
• Warehouse and industrial site networking
• Farm or rural connectivity solutions
• Temporary network setups for events or construction sites

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	DS-3WF1000-EI-2N
General
Product Dimensions (W x H x D)	90.8 mm x 187.87 mm x 57.87 mm (3.57'' x 7.39'' x 2.27'')
Package Dimensions (W x H x D)	256 mm x 231 mm x 86 mm (10.07" x 9.09" x 3.38")
Net Weight	0.26 kg (0.57 lb) per device
Gross Weight	0.9 kg (1.98 lb)
Packing List	Wireless Bridge x 2,Power Adapter (12 VDC, 1 A) x 2,10 / 100 Mbps PoE Injector x 2,Binding Tape x 4,Quick Start Guide x 1,Regulatory Compliance and Safety Information x 1
Packing Method	Packing in pairs
Working Temperature	-30 degreesC to 60 degreesC (-22 degreesF to 140 degreesF)
Working Humidity	5% to 95% (no condensation)
Storage Temperature	-40 degreesC to 80 degreesC (-40 degreesF to 176 degreesF)
Storage Humidity	5% to 95% (no condensation)
Installation Mode	Pole Mounting
Ingress Protection	IP55
Power Consumption	1.8 W for typical (1-ch 2MP IPC), Max. 4.5 W
Wireless Parameter
Max. Transmission Rate of Air Interface	≤ 300 Mbps
Wireless Standard	IEEE 802.11b/g/n (2 x 2 MIMO 300 Mbps)
Working Frequency Band	2400 MHz ~ 2483.5 MHz
Antenna Gain	7 dBi
Antenna Angle	(H) Beamwidth [3 dB] 60degrees, (V) Beamwidth [3 dB] 50degrees
Transmitting Power	22 dBm @11n MCS0 (Note: Transmitting power may vary with local regulations.)
Receiving Sensitivity	-87±2 dBm @HT40 MCS0
Throughput Rate	PTP: 90 Mbps/0.2 KM(HT40),90 Mbps/0.5 KM(HT40),70 Mbps/1 KM(HT40),PTMP(1 to 4): 40 Mbps/1 KM(HT40)
Hardware Parameter
Network Interface	2 x 10/100 Mbps RJ45 ports
LED Indicator	Power indicator,LAN indicator,Signal intensity indicator
Reset	Hardware resetting button
Power Supply	12-24 VDC Passive PoE
Software Function
Application Function	IFM,IPM
Channel Width	10/20/40 MHz
Channel Selection	Auto/manual selection
Security Mode	WPA2-PSK
Security Mechanism	Wireless network name hidden
Network Protocol	NTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging)
Management Method	HCP,Web,iVMS-4200,HPP
System Log	Syslog,Control center information
Upgrade	Web,iVMS-4200,HCP,HPP
HPP	Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
	1. Reboot device
	2. Restore device
	3. Display the topology information
	4. Display the connection status between AP and CPEs, including signal intensity, background noise, sending & receiving rate
	5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power
	6. Bridge alignment
	7. Spectrum scanning
Approval
EMC	CE-EMC(EN 55032, EN 50130-4, EN 55035, EN IEC 61000-3-2, EN 61000-3-3)
Safety	CB (IEC 62368-1),CE-LVD (EN 62368-1)
Chemistry	CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
Radio	EN 301 489-17,EN 301 489-1, EN 61000-3-3, EN IEC 61000-3-2, EN 300 328, EN IEC 62311