ELITE-2000PRO specification sheet

Current Specials & Promotions
Product specification information

Specifications for ELITE-2000PRO

Mercury Elite 2000 Pro UPS

ELITE-2000PRO Gallery image 1 [Size: 170 (W) x 222 (H)]  
Elite 2000 Pro UPS, 2000VA, 3x Output Socket, 3x Output Cable, 1x Bypass Socket, SA Power Cord, 220V/50Hz

UPS 220V / 230V uninterrupted power supplies

Mercury

Out of Stock
This product is no longer available for purchase. This information is for reference purposes only.
Click here to browse for similar products and for great alternatives!

Features:

  • Wide input voltage range
  • Compatible with generators
  • Overload protection
  • Short circuit protection
  • Built-in AVR
  • Battery deep discharge protection & overcharge protection

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Product Code ELITE-2000PRO
Specifications

Rating input voltage
2000 VA / 1200 W
Rating input frequency 60/50Hz (auto sensing)
Input phase Single phase
Input socket With Fuse
Cold Start (0 to 100% load) Press the ON/OFF Switch
Input Range (220V) 140-300
Rating output(VA) 2000
Rating output (W) 1200
Rating output (W) 1200
Power factor 0.6
Rating output voltage (V) 220
Waveform Battery mode (simulated sine wave)
AC mode(sine wave)
AC Voltage Regulation ±10% (Battery mode)
Rear output socket 4 x Universal - Battery backup
Waveform Simulated Sine Wave (Battery mode)
Line Mode Synchronize with the utility
Rating frequency 60Hz or 50 Hz ± 1 Hz
Battery Mode Yellow flashing
Short circuit protection Line Mode Fuse & Firmware protection
Short circuit protection Battery Mode Firmware Protection
Overload protection Line Mode 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.
Overload protection Battery Mode 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately
Indicators AC mode Green Lighting
Indicators Battery Mode Yellow Flashing
Indicators Fault Red Lighting
Alarm Battery Mode Sounding every 10 Seconds
Alarm Low Battery Sounding every Second
Alarm Overload Sounding every 0.5 second
Alarm Fault Continuously sounding
Full Protection Overload, discharge, and
Overcharge protection
Transfer Time Typical 2-6ms, 10ms max.
Transfer Time Typical 2-6ms, 10ms max.
Communication Interface Optional RS232/RJ11
Battery and runtime Rating 2 X 12V/9AH
Recharge time - Typical 6-8 hours recover to 90% capacity
Charge current About 1A at normal mode.
Dimension, D X W X H (mm) 390 x 125 x 225
Net Weight (kgs) 12.7KGS
Humidity 0-90 % RH @ 0- 40°C (non-condensing)
Noise Level Less than 45dB
Compatible with OS Supports Windows
2000/2003/XP/Vista/2008/7
Communication interface Elite 2000pro (N/A)
Elite 2000ipro (USB/RJ11)