IKD300/32GB specification sheet

Overview:

Kingston’s IronKey™ D300 USB Flash drive features an advanced level of security that builds on the features that made IronKey well-respected, to safeguard sensitive information. It’s FIPS 140-2 Level 3 certified, with 256-bit AES hardware encryption in XTS mode. For added peace of mind, the drive uses digitally signed firmware, making it immune to BadUSB, and it enforces complex password protection1 with minimum characteristics to prevent unauthorized access. Encryption and decryption is done on the drive, with no trace left on the host system, and the drive locks down and reformats after 10 invalid attempts, to protect against brute force attacks.

Rugged and secure, IronKey D300 has a zinc casing and tamper-evident epoxy seal for physical security, so you can rest assured the drive will hold up, even in the most demanding situations. It’s customizable, easy to use and waterproof up to 4 feet, conforming to IEC60529 IXP82. SuperSpeed (USB 3.0) technology means you don’t have to compromise speed for security; IronKey D300 allows for fast data transfers, and by adding Kingston’s expertise in Flash memory and the latest in NAND Flash and controller technology, you can be confident in a solution that will be around for years to come.

Features:

• Advanced level of security that builds on the features that made IronKey well-respected
• Available in a Managed model that requires IronKey EMS by DataLocker3
• Rugged and secure casing that meets IronKey standards
• Fast data transfers that use the latest in NAND Flash and controller technology
• Customizable
• Easy to use

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	IKD300/32GB
Interface	USB 3.0
Capacity	32GB
Speed	USB 3.0 - 250MB/s read, 40MB/s write
	USB 2.0 - 30MB/s read, 20MB/s write
Dimensions	77.9 mm x 22.2 mm x 12.05 mm
Waterproof	Up to 4 ft., conforms to IEC 60529 IPX8. Product must be clean and dry before use.
Operating Temperature	0°C to 60°C
Storage Temperature	-20°C to 85°C
Compatibility	USB 3.0 compliant and 2.0 compatible
Minimum System Requirements	USB 3.0 compliant and 2.0 compatible
	Two (2) free drive letters required for use
Standard drive compatible with	Windows 10, Windows 8.1, Windows 8, Windows 7 (SP1), Mac OS X v.10.9.x – 10.12.x, Linux v.2.6x+7
Managed drive compatible with	Windows 10, Windows 8.1, Windows 8, Windows 7 (SP1), Mac OS X v.10.9.x – 10.12.x