MBD-X10SDV-2C-TP4F specification sheet

• Intel Pentium processor D1508, Single socket FCBGA 1667; 2-Core, 4 Threads, 25W
• Up to 128GB ECC RDIMM DDR4 1866MHz or 64GB ECC/non-ECC UDIMM in 4 sockets
• 2 PCI-E 3.0 x8, Mini PCI-E (mSATA support), M.2 PCI-E 3.0 x4 (SATA support), M Key 2242/2280/22110
• 2 10G SFP+ and 2 GbE LAN
• 4 SATA3 (6Gbps) ports via SoC
• 2 USB 3.0 ports (rear), 5 USB 2.0 ports (4 via headers, 1 Type A)
• 2 SuperDOM, 1 COM, TPM 2.0 header, GPIO and SMbus headers
• 12V DC Input and ATX Power Source

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	MBD-X10SDV-2C-TP4F
Product SKUs
MBD-X10SDV-2C-TP4F	X10SDV-2C-TP4F
Physical Stats
Form Factor	Flex ATX
Dimensions	9.0" x 7.25" (22.86cm x 18.42cm)
Processor/Cache
CPU	Intel Pentium Processor D1508.
	Socket FCBGA1667 supported, CPU TDP support 25W
Cores / Cache	2 cores, 4 threads / 3MB cache
System Memory
Memory Capacity	128GB Registered ECC RDIMM, DDR4-2133MHz64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type	1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes	4GB, 8GB, 16GB, 32GB
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors
	Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset	System on Chip
SATA	SoC controller for 4 SATA3 (6 Gbps) ports, RAID 0,1,5,10
	RSTe
IPMI	Support for Intelligent Platform Management Interface v.2.0
	IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Network Controllers	Dual LAN with 10G SFP+ from D-1500 SoC
	Dual LAN with 1GbE with Intel I210
Graphics	Aspeed AST2400 BMC
Input / Output
SATA	4 SATA3 (6Gbps) port
LAN	2 10G SFP+ LAN ports
	2 1GbE LAN ports
	1 RJ45 Dedicated IPMI LAN port
USB	5 USB 2.0 ports (4 headers, 1 Type A)
	2 USB 3.0 ports (2 rear)
Video Output	1 VGA port
Serial Port / Header	1 COM Port (1 header)
TPM	TPM Header
Expansion Slots
PCI-E	2 PCI-E 3.0 x8
	M.2 PCI-E 3.0x4, M Key 2242/2280/22110, Mini-PCI-E with mSATA support
M.2	M.2 Interface: 1 SATA/PCI-E 3.0 x4
	Form Factor: 2242/2280/22110
	Key: M-Key
System BIOS
BIOS Type	128Mb SPI Flash with AMI BIOS
BIOS Features	PCI 3.0
	ACPI 5.0
	USB Keyboard support
	SMBIOS 2.8
	UEFI 2.4
	RTC (Real Time Clock) Wakeup
Management
Software	Intel Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor 5, Watchdog
Power Configurations	ACPI Power Management
	ATX Power connector
	+12V DC Power Input
	Control of power-on for recovery from AC power loss
	CPU thermal trip support for processor protection
	M.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL
PC Health Monitoring
Voltage	+1.8V, +12V, +3.3V, +5V, 1.2V (VDIMM), Chassis intrusion header, System level control, VBAT
FAN	6x 4-pin fan headers (up to 6 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, System level control
Temperature	Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
LED	CPU / System Overheat LED
Other Features	12V DC or ATX Power Source, Chassis intrusion detection, Chassis intrusion header, RoHS
Operating Environment
Operating Temperature Range	0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range	-40°C - 85°C (-40°F - 185°F)
Operating Relative Humidity Range	10% ~ 85% (non-condensing)
Non-Operating Relative Humidity Range	10% ~ 95% (non-condensing)