ME-3000RBK specification sheet

Features:

• Microprocessor control guarantees high reliability.
• PWM Technology with IGBTs.
• Wide Input Voltage Range.
• Communication Ports Selectable : Smart RS-232 and Intelligent slot for AS-400,
• and SNMP card.
• Free Download Software from the internet for monitoring UPS status.
• Optional external battery socket available for extended backup time.
• Cold Start Function.
• Auto self-testing system while turning on the UPS.
• Tower and Rack Mount Available.
• Modular design available for Mecer 1K/ Mecer 2K/ Mecer3K/ Mecer 6K.

Specifications:

© 2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications for the product series
Product Code	ME-3000RBK
Capacity
ME-3000RBK (3000VA)	2100W
Input
Voltage Range	Base on load percentage (100%-80% / 80%-70% / 70%-60% / 60%-0%)
Low Line Transfer	160VAC/140VAC/120VAC/110VAC +/-5VAC
Low Line Comeback	175VAC +/-5VAC
High Line Transfer	300VAC +/-5VAC
High Line Comeback	285VAC +/-5VAC
Frequency Range	46Hz~54Hz
Phase	Single phase with ground
Power Factor	>0.95
Output
Voltage	220VAC/230VAC/240VAC
Voltage Regulation	+/-2%
Frequency (Synchronized Range)	46~54Hz
Frequency (Battery Mode)	50Hz +/-0.2Hz
Current Crest Ratio	3:1
Harmonic Distortion	Tower Case <3%THD (Linear Load), <6%THD (Non–Linear Load); Rack Case N/A
Efficiency
To AC Mode
ME-1000RBK, ME-2000RBK	85%
ME-3000RBK	88%
To Battery Mode	83%
Battery
Tower Case Battery Type	12V/7 2 Ah depending on the capacity of external batteries
Number of Batteries (depending on the capacity of external batteries)
ME-1000RBK	3 batteries
ME-2000RBK, ME-3000RBK	8 batteries
Backup Time (Full Load) (depending on the capacity of external batteries)
ME-1000RBK, ME-3000RBK	5 minutes
ME-2000RBK	9 minutes
Recharge Time	5 hours to 90%
Charging Current (Max.)	1.0A /8A
Charging Voltage
ME-1000RBK, ME-2000RBK	41.1Vdc +/-0.6V
ME-3000RBK	110Vdc +/-0.4V
Rack Case Battery Type	12V/7 2 Ah depending on the capacity of external batteries
Number of Batteries (depending on the capacity of external batteries)
ME-1000RBK	3 batteries
ME-2000RBK, ME-3000RBK	8 batteries
Backup Time (Full Load) depending on the capacity of external batteries
ME-1000RBK, ME-3000RBK	<5 minutes
ME-2000RBK	<9 minutes
Charging Current (Max.)	1.0A/8A
Charging Voltage
ME-1000RBK	41.1Vdc +/-0.6V
ME-2000RBK, ME-3000RBK	110Vdc +/-0.4V
Transfer Time	AC to DC: Zero
Inverter to Bypass	2.5 minutes (Typical)
Indicator	Status: Load Level / Battery Level / Battery Mode / AC Mode / Bypass Mode / Fault
Audible Alarm
Battery Mode	Sounding every 4 seconds
Low Battery	Sounding every second
Overload	Sounding twice every second
Fault	Continuously Sounding
Dimensions (D x W x H)
ME-3000RBK	Tower Case 460mm x 192mm x 340mm
	Rack Case 482.6mm x 450mm x 87mm (with battery)
Weight
ME-1000RBK	Tower Case 15kgs, Rack Case 11.5kgs
ME-2000RBK	Tower Case 35.5kgs, Rack Case 11.2kgs
ME-3000RBK	Tower Case 16kgs, Rack Case 12.3kgs
Environment
Operating Environment	0-40ºC
Relative Humidity	20-90%
Noise Level	<45db @ 1Meter
Interface
Smart RS-232	Supports Windows 98/NT/2000/XP/2003/ME, Linux, Sun Solaris, IBM Aix, Compaq True64, SGI IRIX, FreeBSD, HP-UX, and MAC