MRC-MS110GMP specification sheet

Overview:

The Mercusys MS110GMP is a compact 10 port gigabit desktop switch designed for reliable power and data delivery across modern network setups. Built with eight PoE+ ports and two gigabit uplink ports, it simplifies connectivity for IP cameras, access points, and other PoE-enabled devices. With a strong total power budget, extended transmission support, and silent fanless operation, it suits offices, small businesses, and surveillance installations that need stable performance without complex setup.

Description:

The Mercusys MS110GMP delivers both power and high speed data through a single cable on eight PoE+ ports, reducing wiring clutter and installation time. It supports long distance transmission for flexible device placement, prioritizes critical connections for smooth operation, and automatically recovers unresponsive PoE devices. Its plug and play design and silent operation make it a practical choice for dependable everyday networking.

Features:

Gigabit PoE+ switching for growing networks
This desktop switch combines gigabit speeds with PoE+ support to handle demanding network traffic while powering connected devices efficiently.

• Eight gigabit PoE+ ports for data and power delivery
• Two gigabit RJ45 uplink ports for network expansion
• Total PoE power budget of 111 W

Extended transmission for flexible installation
Designed for scenarios where devices are spread out, the switch supports longer cable runs without sacrificing stability.

• Data and power transmission up to 250 m in extend mode
• Suitable for IP cameras and remote access points

Smart traffic handling and device protection
Built-in modes improve performance, security, and uptime for connected equipment.

• Priority mode assigns higher importance to ports 1 and 2
• Isolation mode separates client traffic with one click
• PoE auto recovery restarts unresponsive powered devices

Silent and simple desktop design
The fanless build ensures quiet operation while keeping energy use low, making it ideal for noise sensitive environments.

• Fanless design for silent operation
• Plug and play setup with no configuration required

Ideal uses and deployment scenarios
This gigabit PoE+ switch fits well into many everyday networking needs.

• Office surveillance systems
• Small business networks
• Dormitories and shared spaces

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	MRC-MS110GMP
Software
Transfer Method	Store-And-Forward
Advanced Features	Compatible With IEEE 802.3af/at Compliant PDs
	Extend Mode Button (Ports 1-4, Up to 250 m PoE power supply and data transmission)
	Priority Mode Button (Ports 1-2)
	Isolation Mode Button (Ports 1-4 / 5-8)
	PoE Auto Recovery (Ports 1-8)
	MAC Address Auto-Learning and Auto-Aging
	IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure for Half-Duplex Mode
Hardware
Dimensions (W X D X H)	8.2 x 4.9 x 1.0 in (209 x 126 x 26 mm)
PoE Ports	RJ45 Ports
	Standard: 802.3 af/at compliant
	PoE Ports: Ports 1-8
	Power Supply: 111 W
Interfaces	8 x 10/100/1000 Mbps PoE+ Ports
	2 x 1000 Mbps RJ45 Ports
	AUTO Negotiation
	AUTO MDI/MDIX
Network Media	10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
	EIA/TIA-568 100Ω STP (maximum 100m)
	100BASE-TX: UTP category 5, 5e cable (maximum 100m)
	EIA/TIA-568 100Ω STP (maximum 100m)
	1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)
	EIA/TIA-568 100Ω STP (maximum 100m)
External Power Supply	External Power Adapter (Output: 54VDC / 2.22A)
Fan Quantity	Fanless
Physical Security Lock	Yes
Jumbo Frame	16 KB
Switching Capacity	20 Gbps
Mac Address Table	4K
Max Power Consumption	7.37 W (220V / 50Hz with no PD connected)
	129.4 W (220V / 50Hz with 111 W PD connected)
Max Heat Dissipation	25.13 BTU/h (220V / 50Hz with no PD connected)
	441.25 BTU/h (220V / 50Hz with 111 W PD connected)
Performance
Packet Forwarding Rate	14.88 Mpps
Others
Certifications	FCC, CE, RoHS
Package Contents	MS110GMP
	Power Adapter
	Installation Guide
Environment	Operating Temperature: -10degreesC~40degreesC (14degreesF~104degreesF)
	Storage Temperature: -40-70 degreesC (-40-158 degreesF)
	Operating Humidity: 10-90% RH non-condensing
	Storage Humidity: 5-90% RH non-condensing