NPOE-SPL-G-5VMU specification sheet

Current Specials & Promotions
Product specification information

Specifications for NPOE-SPL-G-5VMU

Eaton Tripp Lite series PoE to USB Micro-B and RJ45 Active Splitter - 802.af

NPOE-SPL-G-5VMU Gallery image 1 [Size: 1600 (W) x 1200 (H)]   NPOE-SPL-G-5VMU Gallery image 2 [Size: 1600 (W) x 1200 (H)]   NPOE-SPL-G-5VMU Gallery image 3 [Size: 1600 (W) x 1200 (H)]   NPOE-SPL-G-5VMU Gallery image 4 [Size: 1600 (W) x 1200 (H)]  
Eaton Tripp Lite series PoE to USB Micro-B and RJ45 Active Splitter - 802.af, 48V to 5V 1A, Up to 328.08 ft. (100 m), Order on Request

Power over Ethernet POE

Eaton

In Stock (not confirmed) Enquire now!
R 337.00 inc VAT
Features:

Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks
Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.

Supports Power over Ethernet to Save You Money and Give You More Installation Choices
This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.

Simple Plug-and-Play Installation Has the Splitter Connected in Minutes
No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.
  • IEEE 802.3af/at-compliant PoE injector or switch
  • Existing or newly installed Cat5e/6/6a cabling
  • A network device with a 5V 1a USB Micro-B power port
Package Includes
  • NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
  • Quick Start Guide

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specificationsspacer
Product CodeNPOE-SPL-G-5VMUspacer
OVERVIEW
UPC Code37332242143
Product TypeSplitter
TechnologyCat5/5e , Cat6 , PoE
CONNECTIONS
Side A - Connector 1RJ45 (FEMALE)
Side B - Connector 1RJ45 (MALE)
Side B - Connector 2MICRO-USB B (MALE)
PHYSICAL
ColorBlack
Unit Weight (kg)0.05
ENVIRONMENTAL
Operating Temperature Range32° to 104°F (0° to 40°C)
Storage Temperature Range5° to 122°F (-15° to 50°C)
Relative Humidity0% to 90% RH, Non-Condensing
COMMUNICATIONS
Network Compatibility1 Gbps (Gigabit)
IEEE Standards Supported802.3 , 802.3ab , 802.3af , 802.3u
STANDARDS & COMPLIANCE
Product ComplianceRoHS , CE (Europe) , REACH , FCC (USA)