RBLAMPGM+RG520F-EU specification sheet

Overview:

The MikroTik LAMP 5G R16 is a rugged outdoor router designed for environments where traditional directional antennas fall short. Unlike standard setups that require precise alignment to a single tower, this device utilizes an omnidirectional antenna system to automatically connect to the best available network signal. This capability ensures reliable connectivity in complex locations like cities, industrial sites, ports, and transport hubs where multiple towers exist or conditions change frequently. The unit is built to withstand harsh elements including rain, dust, extreme temperatures, and salty sea air, making it suitable for demanding maritime deployments.

Description:

This outdoor 5G router combines high-performance connectivity with robust durability. It features a built-in eSIM that allows for remote activation of data plans without the need to handle physical SIM cards, streamlining deployment for single units or large networks. The device supports third-party eSIM providers and multiple profiles, enabling seamless switching between operators for backup or roaming needs. With IP67 rating and EN 60945 maritime compliance, it delivers stable performance in challenging weather conditions while providing accurate GNSS positioning for asset tracking and fleet management applications.

Features:

Connectivity and Network Performance
The LAMP 5G R16 leverages the latest cellular standards to deliver high-speed internet access. Powered by a Quectel RG520F-EU modem, it supports 5G SA/NSA Release 16 and LTE Cat 20, ensuring fast download and upload speeds even in congested areas. The omnidirectional design eliminates the need for manual antenna realignment as signal sources shift throughout the day.

• Cellular throughput of up to 4.2 Gbps downlink and 900 Mbps uplink
• Supports 5G SA/NSA Release 16, LTE Cat 20, and 3G R8
• Internal omnidirectional antenna with gain up to 6.5 dBi
• 4 x 4 MIMO downlink and 2 x 2 MIMO uplink for stable connections
• Holds multiple eSIM profiles or supports third-party SIM providers

Hardware Specifications and Design
Built on a reliable ARM-based architecture, the router runs RouterOS v7 with a Level 3 licence. The system is housed in an outdoor enclosure rated IP67 for dust and water resistance, capable of operating in temperatures ranging from -40 to +70 degrees Celsius. The device includes built-in GNSS support for GPS, Galileo, BeiDou, and QZSS satellite systems, which aids in location-aware applications without being certified for critical navigation safety.

• Processor: Marvell 88F3720 ARM 64-bit at 800 MHz with 2 cores
• Memory: 512 MB DDR3L and 32 MB Flash storage
• Ethernet port: 1 x 10/100/1000 RJ45 (Gbps)
• PoE input: 802.3af/at compliant, accepting 12 to 56 V
• Power consumption: Maximum 10 W with fanless cooling design
• SIM configuration: 1 x Micro SIM slot plus built-in eSIM

Maintenance and Part Identification
The device is engineered for long-term reliability in remote or hard-to-reach locations. Its fanless cooling system contributes to a mean time between failures (MTBF) of approximately 200,000 hours at standard temperatures. Installation is straightforward using the included stainless-steel mounting bracket designed for pole attachment.

The specific part number for this unit is RBLAMPGM+RG520F-EU. This identifier ensures you receive the correct European model with the appropriate frequency bands and power specifications required for your region.

What's in the box

• MikroTik LAMP 5G R16 outdoor router unit
• Stainless-steel mounting bracket for pole installation
• PoE injector or power supply components as required by region
• User documentation and quick start guide

Specifications:

© 2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications and features
Product Code	RBLAMPGM+RG520F-EU
Key specifications
SKU	RBLAMPGM+RG520F-EU
Wi-Fi generation	LTE only
Radio bands	LTE
Ethernet ports	1
Fastest wired port	1 Gbps
Details
Router type	5G R16 outdoor router with omni antenna and eSIM
Ethernet port details	1 x 10/100/1000 RJ45
Processor	Marvell 88F3720 ARM 64-bit, 800 MHz
Memory	512 MB DDR3L
Antenna gain	Internal omnidirectional, up to 6.5 dBi
MIMO	4 x 4 MIMO downlink , 2 x 2 MIMO uplink (5G / LTE)
Management	MikroTik Connectivity eSIM data service
Flash storage	32 MB
Operating system	RouterOS v7 (Level 3 licence)
Horizontal beamwidth	360degrees (omnidirectional)
PoE input	802.3af/at PoE-in, 12 to 56 V
SIM slots	1 x Micro SIM , built-in eSIM (multiple profiles, third-party providers)
Other	GNSS (GPS, Galileo, BeiDou, QZSS)
Processor cores	2
Cellular modem	5G SA/NSA Release 16, LTE Cat 20, 3G R8 (Quectel RG520F-EU)
Cellular throughput	4.2 Gbps down / 900 Mbps up
Power
Power consumption	≤ 10 W
Cooling	Fanless , MTBF ~200,000 h at 25 degreesC
Power input	PoE-in, 12 to 56 V
Physical and environment
Mounting	Pole (stainless-steel bracket)
Ingress protection	IP67
Enclosure	Outdoor , EN 60945 maritime
Operating temperature	-40 to +70 degreesC

FAQ

Is the MikroTik LAMP 5G R16 suitable for marine environments"
The device is designed to meet the EN 60945 maritime standard and features an IP67-rated enclosure with a stainless-steel mounting bracket, making it resistant to rain, dust, heat, cold, and salty sea air for use at ports or aboard vessels.

How does the omnidirectional antenna system improve connectivity compared to traditional routers"
The LAMP 5G R16 uses an internal omnidirectional antenna that connects to the best available tower around it without requiring manual realignment, allowing it to adapt automatically when network conditions change or a specific tower goes offline.

Does this router require physical SIM cards for operation"
No, the device features built-in eSIM support with multiple profile storage, allowing operators to activate data plans remotely; however, it also includes one Micro-SIM slot if you prefer using third-party providers or physical cards.

What power requirements must be met for installation"
The router supports 802.3af/at PoE-in and accepts a voltage input of 12 to 56 V, making it suitable for standard Power over Ethernet deployments with a maximum power consumption of approximately 10 W.

Can the device be used for critical navigation or safety-critical marine applications"
No, while the built-in GNSS support provides accurate positioning information via GPS, Galileo, BeiDou, and QZSS, this functionality is intended only for tracking and location-aware applications rather than route guidance or safety-critical navigation.

How many wired devices can connect to the LAMP 5G R16"
The unit includes a single Ethernet port that supports speeds up to 1 Gbps, connecting one external device via an RJ45 cable for LAN connectivity.