SSDPEDMW400G401 specification sheet

Current Specials & Promotions
Product specification information

Specifications for SSDPEDMW400G401

Intel 750 series 400Gb PCI-e 3.0 (4x) 20nm MLC Solid-State Drive

SSDPEDMW400G401 Gallery image 1 [Size: 707 (W) x 328 (H)]  
Intel 750 Series 400GB 1/2 Height PCIe NVMe 3.0 Solid State Drive - MTBF 1,2M hours, Seq Read 2200MB/s, Random Read 430000 IOPS, Seq Write 900 MB/s, End-to-End Data Protection, 70GB per day

PCIe card SSD

Intel

Out of Stock
This product is no longer available for purchase. This information is for reference purposes only.
Click here to browse for similar products and for great alternatives!

Overview:

Experience the future of storage performance for desktop client and workstation users with the Intel SSD 750 Series. The Intel SSD 750 Series delivers uncompromised performance by utilizing NVM Express over four lanes of PCIe 3.0. With both Add-in Card and 2.5-inch form factors, the Intel SSD 750 Series eases migration from SATA to PCIe 3.0 without power or thermal limitations on performance. The SSD can now deliver the ultimate in performance in a variety of system form factors and configurations.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specificationsspacer
Product CodeSSDPEDMW400G401spacer
Capacity 400GB
PCIe Gen3 x4
Form Factor 2.5-inch Form Factor
15mm Z-height
8639-compatible connector
Add-in Card (AIC) Form Factor
Half-height, Half-length
Single slot x4 connector
Performance Seq R/W: Up to 2400/1200 MB/s3
4K Random Read: Up to 440K
4K Random Write: Up to 290K
Latency (average sequential) Read: 20 μs (TYP)
Write: 20 μs (TYP)
Components Intel 20nm MLC NAND Flash Memory
Operating System Support Windows 7* 64 bit
Windows 8* 64 bit
Windows 8.1* 64 bit
UEFI* 2.3.1 or later
Reliability Uncorrectable Bit Error Rate (UBER): 1 sector per 1016 bits read
Mean Time Before Failure (MTBF): 1.2 million hours
Power 2.5-inch: 3.3V and 12V Supply Rail
AIC: 3.3V and 12V Supply Rail
Enhanced power-loss data protection
Active/Idle (TYP): 25W/4W (TYP)
Compliance NVM Express* 1.0
PCI Express* Base Specification Rev 3.0
SFF 8639 Enterprise SSD Form Factor Version 1.0a
PCI Express Card Electro-Mechanical* (CEM) Specification Rev 2.0
Certifications and Declarations UL*, CE*, C-Tick*, BSMI*, KCC*, Microsoft WHQL*, VCCI
Endurance Rating 70 GB Writes Per Day
Up to 219 TBW (Terabytes Written)
Temperature Specification Operating:
AIC: 0 to 55° C
2.5-inch: 0 to 70° C
Non-Operating6: -55 to 95° C
Temperature monitoring
Weight AIC: up to 195 gm
2.5-inch: up to 125 gm
Shock 2.5-inch: 1,000 G/0.5msec
AIC: 50 G Trapezoidal, 170 in/s
Vibration Operating: 2.17 GRMS (5-700Hz)
Non-Operating: 3.13 GRMS (5-800Hz)
Altitude (Simulated) Operating: -1,000 to 10,000 ft
Non-Operating: -1,000 to 40,000 ft
Product Ecological Compliance RoHS