ST3160310CS specification sheet
Specifications for ST3160310CS
Seagate Pipeline HD 160GB 3.5" 5900rpm 8MB Cache SATA2 3Gb/s Hard Disk Drive
![ST3160310CS Gallery image 1 [Size: 500 (W) x 375 (H)]](i/SEAGATE/th200/th200_245005_IMG1.jpg)
Seagate Pipeline HD 160GB 3.5" 5900rpm 8MB Cache SATA2 3Gb/s Hard Disk Drive, ST3160310CS
Drives: SATA2 hard drives
Drives: SATA2 hard drives
Seagate
In Stock Buy now!
R 540.00 inc VAT
Specifications:
| ©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications | |
| Product Code | ST3160310CS |
| Hard Disk Model | SEAGATE ST3160310CS |
| Disk Family | Pipeline HD 160310 |
| Form Factor | 3.5" |
| Capacity | 160 GB (160 x 1 000 000 000 bytes) |
| Number Of Disks | 1 |
| Number Of Heads | 1 |
| Rotational Speed | 5900 RPM |
| Rotation Time | 10.17 ms |
| Average Rotational Latency | 5.08 ms |
| Disk Interface | Serial-ATA/300 |
| Buffer-Host Max. Rate | 300 MB/seconds |
| Buffer Size | 8192 KB |
| Drive Ready Time (typical) | 6 seconds |
| Average Seek Time | 14 ms |
| Track To Track Seek Time | 1 ms |
| Width | 101.85 mm (3.98 inch) |
| Depth | 146.99 mm (5.75 inch) |
| Height | 20.2 mm (0.79 inch) |
| Weight | 415 grams (0.91 pounds) |
| Acoustic (Idle) | 2.7 Bel |
| Acoustic (Min performance and volume) | 2.9 Bel |
| Acoustic (Max performance and volume) | 2.9 Bel |
| Required Power For Spinup | 2800 mA |
| Power Required (Seek) | 12.8 W |
| Power Required (Idle) | 7.20 W |
| Power Required (Standby) | 0.80 W |
| Manufacturer | Seagate Technology |
Sold by ComX Computers
Specifications are subject to change without notice. E&OE. Prices are a guide only, and are valid on 2026-09-18 only, subject to stock being available.
The specifications displayed above apply to the entire range and may not apply to this specific model. Kindly note that options cannot be changed for most models, and some options are not available in South Africa.