TE100-S5 specification sheet

Overview:

TE100-S5 is an Auto-MDIX switch designed specifically to boost network performance by eliminating network congestions and unnecessary network traffics. Each port on the Switch provides dedicated bandwidth and can negotiate between 10/100Mbps network speeds and half/full duplex modes. Plug and Play provides cost-effective and high performance solutions.

Features:

• 5 10/100Mbps Auto-Negotiation, Auto-MDIX Fast Ethernet RJ-45 ports
• Compliant with IEEE 802.3 / IEEE 802.3u standards
• IEEE 802.3x Flow Control support
• Provide 1K MAC address entries
• Compliant with Windows, Linux, and Mac Operating Systems.
• Store-and-Forward Switching method
• Non-blocking Architecture
• Diagnostic LEDs
• Plug & Play

Specifications:

© 2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications for the product series
Product Code	TE100-S5
Hardware
Standards	IEEE 802.3 10Base-T
	IEEE 802.3u 100Base-TX
	IEEE 802.3x Flow Control
Network Media	Ethernet: UTP/STP Cat. 3, 4, 5, EIA/TIA-568 100-ohm
	Fast Ethernet: UTP/STP Cat. 5. 5E, EIA/TIA-568 100-ohm
Data Rate	Ethernet: 10Mbps/20Mbps (Half/Full-Duplex)
	Fast Ethernet: 100Mbps/200Mbps (Half/Full-Duplex)
Switch Fabric	1Gbps Forwarding Capacity
Topology	Star
Interface	5 10/100Mbps Auto-MDIX RJ-45 Ports
Filtering Table	1K entries per device
Buffer Memory	384Kbits per device
Power Consumption	2.8 watts (max)
Diagnostic LED	Power, Link/ACT, 100Mbps
Power Adapter	Switching Power 5V DC 1.2A or Linear Power 7.5V DC 1A
Dimension	100 x 78 x 31mm (3.9 x 3 x 1.2 inches)
Weight	128g (4.5oz.)
Temperature	Operating: 0° ~ 50° C (32° ~ 122° F)
Humidity	10%~90% (Non-Condensing)
Certification	CE, FCC