TI-S24048 specification sheet

Overview:

TRENDnet’s high efficiency 240 W Single Output Industrial DIN-Rail Power Supply, model TI-S24048 (Mean Well SDR-240-48), supplies up to 240 Watts (48 V, 5 A) of power to industrial PoE equipment such as switches, network cameras, and WiFi access points. This power supply comes with active PFC, an integrated DIN-rail mount, and overload current protection.

Features:

240 Watt Power
Provides up to 240 Watts (48 V, 5 A) of power for PoE devices such as switches, network cameras, and access points

Active PFC
The built-in active Power Factor Controller (PFC, PF > 0.93) helps eliminate unusable reactive power

Overload Protection
Overload/short circuit/over voltage/over temperature protection

Full Load Test
This power supply undergoes a 100 % full load burn-in test

Passive Cooling
Cooling by free air convection

DIN-Rail Mount
Metal enclosure with integrated DIN-rail mount

Extreme Temperatures
Rated for an operating temperature range of -25 to 70 °C (-13 to 158 °F)

Safety Certifications
Certified for UL 508 and TUV EN60950-1
Electro Magnetic Emission/Immunity
Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2/3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A, SEMI F47, and GL approved

Vibration Resistant
Rated for vibration (IEC 60068-2-6)

LED Indicator
LED indicator confirms power to the unit

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	TI-S24048
Interface	Input: 100-240 V AC, 50/60 Hz, 1.8 A 125-370 V DC
	Output: 240 Watts, 48 V, 5 A
	DIN-rail: TS-35/7.5 or 15
Housing	Metal case
	DIN-rail mount
	LED indicator confirms power to the unit
Special Features	DC OK relay contact
	150% peak load capacity
	Short circuit/overload/over voltage/over temperature protection
	Protection type: shut down and repower
Operating Temperature	- 25 to 70 °C (- 13 to 158 °F)
Operating Humidity	Max. 95 % non-condensing
MTBF	1,693,000 hours
Dimensions	40 x 125 x 114 mm (1.6 x 4.9 x 4.5 in.)
Weight	1.03 kg (2.3 lbs.)
Certifications (Mean Well)	CE
	UL 508CB 60950-1
	TUV EN60950-1