UA-G3FLEX-W specification sheet

Current Specials & Promotions
Product specification information

Specifications for UA-G3FLEX-W

Ubiquiti UniFi Access - NFC Card Reader with Keypad - White

UA-G3FLEX-W Gallery image 1 [Size: 1200 (W) x 1200 (H)]   UA-G3FLEX-W Gallery image 2 [Size: 1243 (W) x 1200 (H)]   UA-G3FLEX-W Gallery image 3 [Size: 790 (W) x 704 (H)]   UA-G3FLEX-W Gallery image 4 [Size: 1222 (W) x 1200 (H)]  
Ubiquiti UniFi Access - NFC Card Reader with Keypad - White, UA-G3-Flex-W, NFC card & Keyfob Access, pin Access, IP55 weatherproofing, Indoor and Outdoor use, 1x Ethernet RJ45 Port Networking Interface, BLE, NFC, 12 capacitive buttons, Speaker, 13.56 MHz NFC Frequency

Home Automation / Smart home

Ubiquiti

In Stock Buy now!
R 3 755.00 inc VAT
Overview:

Reader Flex
UA-G3-Flex-W

Third-generation NFC card reader with a keypad and Touch Pass support.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specificationsspacer
Product CodeUA-G3FLEX-Wspacer
Overview
Dimensions84 x 84 x 40.8 mm
(3.3 x 3.3 x 1.6")
NFC Card & Keyfob AccessYes
PIN AccessYes
Apple/Google WalletYes
Mobile UnlockYes
NDAA CompliantYes
UL 294 LevelDestructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
WeatherproofingIP55
Mechanical
Weight165 g (5.8 oz)
Enclosure MaterialPolycarbonate, glass, aluminium alloy
Mount MaterialPolycarbonate, aluminum alloy
MountingWall (Included)
Gang-box, junction box (Optional)
Hardware
Indoor and Outdoor UseYes
Ambient Operating Temperature-30 to 60° C
(-22 to 140° F)
Ambient Operating Humidity5 to 90% noncondensing
Networking Interface(1) 10/100 MbE RJ45 port
ConnectivityBLE 4.1
NFC
Power MethodPoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Max. Power Consumption5W
Supported Voltage Range44-57V DC
ESD/EMP ProtectionAir: ±15kV, contact: ±8kV
Sensors(12) Capacitive buttons
SpeakerYes
LEDsR/G/B/W Learn More
Button(1) Factory-reset
NFC Frequency13.56 MHz
NFC Read Range< 30 mm (1.18'')
NFC TechnologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
MIFARE Classic / MIFARE DESFIRE
Sony FeliCa (ID only)
NFC Forum tags T1T, T2T, T3T, T4T and T5T
ECP 2.0
PoE Cabling RequirementsCat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords , 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 GradeGrade assignment: I
CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision levelUA-G3-Flex V01
Software
Management ApplicationAccess