UB-USW 24 POE specification sheet
Specifications for UB-USW 24 POE
Ubiquiti UniFi Switch Gen 2 - 24 port Layer 2 switch
![UB-USW 24 POE Gallery image 1 [Size: 1500 (W) x 1500 (H)]](i/ubiquiti/th200/th200_ub-usw_24_poe_1.jpg)
![UB-USW 24 POE Gallery image 2 [Size: 1500 (W) x 1500 (H)]](i/ubiquiti/th200/th200_ub-usw_24_poe_2.jpg)
![UB-USW 24 POE Gallery image 3 [Size: 1500 (W) x 1500 (H)]](i/ubiquiti/th200/th200_UB-USW 24 POE 3.jpg)
![UB-USW 24 POE Gallery image 4 [Size: 1500 (W) x 1500 (H)]](i/ubiquiti/th200/th200_UB-USW 24 POE 4.jpg)
Network: Switch
Ubiquiti
About this product
The Ubiquiti USW-24-POE UniFi Standard 24 PoE is a 24-port Layer 2 Gigabit Ethernet switch with 16 x 802.3af/at PoE+ ports, 2 x 1G SFP ports, a 95W PoE budget and a 1.3 inch touchscreen display. Its 1U rack-mount design and fanless cooling make it a practical choice for business networks, IP cameras, wireless access points, VoIP devices and other network equipment. Buy this Ubiquiti UniFi PoE switch from our website for a scalable wired networking solution in South Africa.
Overview Summary
Ubiquiti USW-24-POE UniFi Standard 24 PoE Switch provides 24 x 10/100/1000 Gigabit Ethernet RJ45 ports, including 16 x PoE+ ports supporting IEEE 802.3af/at devices. The switch provides up to 95W of total PoE availability and up to 32W of PoE+ output per port, allowing compatible devices such as access points, IP cameras and VoIP equipment to receive both network connectivity and power through Ethernet.
The switch also includes 2 x 1G SFP ports for fibre or compatible SFP connectivity, 52 Gbps switching capacity, 26 Gbps total non-blocking throughput and a 39 Mpps forwarding rate. It supports a broad range of Layer 2 networking features and is managed through UniFi Network software. The 1.3 inch touchscreen provides local device information, while the fanless cooling system helps provide quiet operation.
Performance tier: Business and professional Gigabit Layer 2 network switch
Uses: Business networking, IP surveillance, wireless access points, VoIP, office networks, VLAN networks, rack-mounted network infrastructure
Description
The Ubiquiti USW-24-POE is a UniFi Standard 24 PoE network switch designed for managed Gigabit Ethernet networks that require both data connectivity and Power over Ethernet. It provides 24 x 10/100/1000 Ethernet RJ45 ports, with 16 ports supporting IEEE 802.3af/at PoE+. The remaining Ethernet ports can be used for standard network connections without PoE output.
With a total PoE availability of 95W, the switch can power compatible PoE devices directly through network cabling. Each PoE+ port supports up to 32W by PSE specification. This makes the switch suitable for connecting compatible UniFi access points, IP cameras, VoIP equipment and other PoE network devices without requiring a separate power connection for each supported device.
Two 1G SFP ports provide options for fibre or other compatible SFP uplinks. The switch has a 52 Gbps switching capacity, 26 Gbps total non-blocking throughput and a 39 Mpps forwarding rate, providing Gigabit switching performance for business and professional network environments.
The USW-24-POE is a 1U rack-mount switch with an SGCC steel enclosure and support for rack depths from 400 to 1200 mm. It features a 1.3 inch touchscreen display and fanless cooling. Network management is provided through UniFi Network software, with support for VLANs, LACP, STP and RSTP, IGMP snooping, 802.1X control, DHCP snooping, port isolation, port mirroring, jumbo frames, voice VLAN and other Layer 2 networking functions.
Features
The Ubiquiti USW-24-POE combines Gigabit Ethernet switching, PoE+ power delivery and UniFi management in a rack-mount design for structured network installations.
- 24 x 10/100/1000 Gigabit Ethernet RJ45 ports
- 16 x PoE+ Ethernet ports
- IEEE 802.3af/at PoE+ support
- 95W total available PoE budget
- Up to 32W PoE+ output per port by PSE specification
- 2 x 1G SFP Ethernet ports for compatible uplink connectivity
- 52 Gbps switching capacity
- 26 Gbps total non-blocking throughput
- 39 Mpps forwarding rate
- 1.3 inch touchscreen display
- Fanless cooling system
- 1U rack-mount form factor
- Supports up to 1,000 VLANs
- 8,000 MAC address table size
- LACP port aggregation support
- STP and RSTP support
- IGMP snooping and advanced IGMP configuration
- 802.1X control
- MAC-based access control and device isolation
- DHCP snooping and guarding
- Port isolation and port mirroring
- Jumbo frame support
- Voice VLAN support
- Loop protection
- UniFi Network management
What's in the Box
- Ubiquiti USW-24-POE UniFi Standard 24 PoE switch
- Rack mounting hardware
- Power cable
Specifications
| ©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications | |
| Product Code | UB-USW 24 POE |
| Overview | |
| Dimensions | 442 x 200 x 44 mm |
| Port Layout | 1 GbE RJ45 - 24 (16 PoE+) (1G/100M/10M) |
| 1G SFP - 2 (1G) | |
| Max. PoE Output | Up to PoE+ |
| Total PoE Availability | 95W |
| Form Factor | Rack mount (1U) |
| Performance | |
| Switching Capacity | 52 Gbps |
| Total Non-Blocking Throughput | 26 Gbps |
| Forwarding Rate | 39 Mpps |
| Supported VLANs | 1, 000 |
| MAC Address Table Size | 8, 000 |
| Packet Buffer Size | 0.5 MB |
| Access Lists | IPv4 - 128 |
| MAC - 128 | |
| Layer 2 Features | |
| LACP Port Aggregation | Yes |
| STP & RSTP | Yes |
| Advanced IGMP Configuration (Querier, Fast Leave, Router Port) | Yes |
| IGMP Snooping | Yes |
| 802.1X Control | Yes |
| MAC-Based ACLs & Device Isolation | Yes |
| DHCP Snooping & Guarding | Yes |
| Egress Rate Limit | Yes |
| Flow Control | Yes |
| Storm Control | Yes |
| Multicast & Broadcast Rate Limiting | Yes |
| MAC Address Blocking | Yes |
| IP-Based ACLs & Network Isolation | Yes |
| MAC-Based Port Restriction | Yes |
| Port Isolation | Yes |
| Port Mirroring | Yes |
| Jumbo Frames | Yes |
| LLDP-MED | Yes |
| Voice VLAN | Yes |
| Loop Protection | Yes |
| Virtual Network Override | Yes |
| Hardware | |
| PoE Ports | PoE+ - 16 |
| Max. PoE Wattage per Port by PSE | PoE - 15.4W |
| PoE+ - 32W | |
| Max. Power Consumption | 25W (Excluding PoE output) |
| 120W (Including PoE Output) | |
| Power Method | Universal input, 100-240V AC, 50/60 Hz |
| Power Input Method | AC input |
| Power Supply | AC/DC, internal, 120W |
| Supported Voltage Range | 100-240V AC |
| Management | Ethernet |
| AR | |
| Heat Dissipation | 85.3 BTU/hr (Excluding PoE Output) |
| Weight | Without mounting brackets: 3 kg (6.6 lb) |
| With mounting brackets: 3.1 kg (6.8 lb) | |
| Enclosure Material | SGCC steel |
| Mount Material | SGCC steel |
| Supported Rack Depth | 400~1200 mm |
| LCM Display | 1.3" touchscreen |
| ESD Protection | Air: ± 16kV, contact: ± 12kV |
| Ambient Operating Temperature | -5 to 40degrees C (23 to 104degrees F) |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| NDAA Compliant | Yes |
| Certifications | CE, FCC, IC, Anatel: 00593-21-08356 |
| Software | |
| Application Requirements | UniFi Network - Version 7.2.94 and later |
FAQ
What is the Ubiquiti USW-24-POE?
The Ubiquiti USW-24-POE is a 24-port managed Layer 2 Gigabit Ethernet switch with 16 PoE+ ports and 2 x 1G SFP ports.
How many PoE ports does the USW-24-POE have?
The switch has 16 PoE+ ports supporting IEEE 802.3af/at devices.
What is the PoE budget of the USW-24-POE?
The USW-24-POE provides 95W of total available PoE power. Each PoE+ port supports up to 32W by PSE specification.
Can the USW-24-POE power IP cameras?
Yes. Compatible IEEE 802.3af/at PoE devices such as IP cameras can receive power and network connectivity through the PoE+ ports.
Can the USW-24-POE power wireless access points?
Yes. Compatible IEEE 802.3af/at wireless access points can be connected to the PoE+ ports for network connectivity and power over Ethernet.
Does the USW-24-POE have SFP ports?
Yes. The switch has 2 x 1G SFP Ethernet ports for compatible SFP connectivity.
Is the USW-24-POE suitable for rack mounting?
Yes. The switch has a 1U rack-mount form factor and supports rack depths from 400 to 1200 mm.
Does the USW-24-POE have a touchscreen?
Yes. The switch includes a 1.3 inch touchscreen display for local device information.
Is the Ubiquiti USW-24-POE fanless?
Yes. The USW-24-POE uses a fanless cooling system for quiet operation.
What software is used to manage the USW-24-POE?
The USW-24-POE is managed through UniFi Network software and requires UniFi Network version 7.2.94 or later according to the manufacturer specifications.
What are common uses for the USW-24-POE?
Common uses include business networks, IP surveillance, wireless access points, VoIP deployments, VLAN networks and structured rack-mounted network infrastructure.
Sold by ComX Computers
