UPS-ONL-1KVA-RX-LQ specification sheet

Overview:

High Power-Density Rackmount Online UPS

Features:

• True double-conversion pure sinewave output
• Microprocessor control optimizes reliability
• Input power factor correction
• Output power factor 0.8
• Wide input voltage (110V – 300V)
• Converter mode available
• ECO mode for energy saving
• Generator compatible
• Cold Start function
• USB and RS-232 Communication with free multiple server power control software
• Optional WEB/SNMP Network Card for remote monitoring and control
• LCD display allows easy monitoring and access of UPS status
• ESD / Surge protection and two year warranty on electronics
   

Specifications:

© 2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications and features
Product Code	UPS-ONL-1KVA-RX-LQ
SPECIFICTATIONS
INPUT	230 VAC - Single Phase with Ground
Voltage	110 - 300 VAC @ 50% load
Voltage Range	160 - 280 VAC @ 100% load
	40Hz - 70Hz
Frequency Range	>= 0.99 at 100% Load and Nominal Input Voltage
Power Factor	<= 8%
Input Socket Type	IEC C14
Input Over-Current Protection	Circuit Breaker (Manually Resettable)
Input Surge / Lightning Protection	400V Metal-oxide Varistors
OUTPUT	1000 VA / 800 W
Continious Output Power	230 VAC (Programmable - 200/208/220/240 VAC)
Default Output Voltage	± 1%
Voltage Regulation	47 Hz - 53 Hz
Frequency Range (Synchronised)	50 Hz +/- 0.25 Hz (or 60 Hz +/- 0.3 Hz in converter mode)
Frequency Range (Battery Mode)	3::1
Current Crest Ratio	<= 3% THD (Linear Load)
Harmonic Distortion	<= 6 % THD (Non-linear Load)
	Zero
Transfer Time - AC to Inverter Mode	4 ms (Typical)
Transfer Time - Inverter to Bypass	Pure Sinewave
Waveform	IEC C13 (3 x sockets)
Output Socket Type
EFFICIENCY	0.88
AC Mode	0.83
Battery Mode
INDICATORS	Status, Load Level, Battery Level, Input/Output Voltage, Discharge Timer and Fault Condition
LCD
Dimensions	310 x 438 x 88 mm
	12 kg
ALARM	Sounding every 4 seconds
Mains Fail / Battery Mode Alarm	Sounding every 1 second
Low Battery Alarm	Twice every second
Overload Alarm	Continuously sounding
Fault Alarm	Yes - Mains Fail / Battery alarm via front panel
Alarm Silence	Yes - Supports Windows, Linux, Synology and MAC
RS-232 Serial Port Monitoring	Yes - Supports Windows, Linux, Synology and MAC
USB Port Monitoring	Option - Supports full remote network management
WEB / SNMP Network Slot
OPTIONS	Enables the UPS to be installed into a network rack
Optional Rackmount Rail Kit	Enables the UPS to be bypassed and fully isolated
Optional Static Bypass Switch	Enables a direct connection to the PC or Server
IEC Male / Female Power Cord	Allows you to connect normal RSA plugs to the UPS