W12

Overview

The Tenda W12 AC1200 dual band in-wall access point is engineered for modern indoor networking where performance, stability, and discreet installation matter. Designed to fit seamlessly into standard wall panels, it delivers reliable wireless coverage for environments such as hotels, apartments, villas, and entertainment spaces. With support for the 802.11ac Wave 2 standard and MU-MIMO technology, it ensures consistent connectivity across multiple devices while maintaining high throughput and low latency.

Description

The Tenda W12 is a compact in-wall wireless access point that combines Gigabit wired performance with dual band WiFi speeds of up to 1200 Mbps. It supports PoE for simplified deployment, allowing both power and data transmission through a single cable. Built for dense environments, it efficiently handles multiple connected users while maintaining stable and balanced network performance. Its low-profile design and customizable appearance make it suitable for installations where aesthetics are important alongside functionality.

Features

Clean Installation with Flexible Design
Built with a slim 86mm wall panel format, the device integrates neatly into existing interiors without drawing attention. A wide selection of color options and panel finishes allows it to match different decor styles, making it ideal for hospitality and residential deployments where visual consistency is required.

Fast Dual Band Connectivity for Modern Networks
The combination of 2.4GHz and 5GHz bands enables flexible connectivity, supporting both legacy and high-speed devices. With Gigabit Ethernet ports and wireless speeds reaching AC1200 levels, the unit is well suited for fibre-based internet connections and bandwidth-intensive usage scenarios.

Key connectivity capabilities include:

• Dual band speeds up to 300 Mbps on 2.4GHz and 867 Mbps on 5GHz
• Two Gigabit Ethernet ports including PoE input
• Bandwidth support for 20MHz, 40MHz, and 80MHz channels

Efficient Multi-User Performance
With MU-MIMO and Wave 2 technology, the access point communicates with multiple devices simultaneously rather than sequentially. This reduces latency and improves overall throughput in busy environments such as hotels or shared living spaces.

Operational advantages:

• Smooth streaming and gaming across multiple users
• Reduced congestion with intelligent band steering
• Balanced load distribution between frequency bands

Optimized Coverage Across Adjacent Rooms
The internal RF architecture is designed to minimize interference and maximize signal efficiency. This allows the device to cover up to two adjacent rooms with stable wireless performance, reducing the need for additional hardware.

Coverage highlights:

• Dedicated RF design for stable signal processing
• 3dBi antenna gain for consistent indoor reach
• Effective signal isolation to reduce interference

Simplified Deployment with PoE Support
Power over Ethernet eliminates the need for separate power cabling. This simplifies installation and reduces infrastructure changes, particularly useful in retrofitting existing buildings.

Installation benefits:

• Single cable for power and data
• Compatible with IEEE 802.3af PoE standard
• Lower overall deployment complexity

Advanced Network Control and Management
The device includes a broad set of software features for network optimization, monitoring, and control. It integrates with centralized management platforms, allowing administrators to manage multiple units efficiently.

Management and control functions include:

• Multiple SSIDs with VLAN tagging support
• Guest network and access control options
• Fast roaming support with 802.11k/v/r
• Band steering and automatic channel selection
• Device monitoring, diagnostics, and scheduled reboot

Technical Details and System Capabilities
Model reference: W12
Part number / SKU: W12

Core hardware and performance:

• Maximum recommended clients: 35 (supports higher capacity environments)
• Maximum wireless speed: 1167 Mbps combined
• Ports: 1x Gigabit Ethernet, 1x Gigabit Ethernet with PoE
• Power consumption: 7.3W
• Operating modes: AP and Client plus AP

Wireless and protocol support:

• Standards: IEEE 802.11b/g/n/a/ac Wave 2
• Frequency bands: 2.4GHz and 5GHz
• Security: WPA, WPA2, WPA-PSK, WPA2-PSK, WEP
• Technologies: MU-MIMO, Beamforming, OFDMA

Environmental parameters:

• Operating temperature: -10 C to 45 C
• Storage temperature: -30 C to 70 C
• Humidity tolerance: up to 90 percent non-condensing

This in-wall access point provides a structured balance between performance, scalability, and discreet deployment, making it suitable for professional indoor wireless network installations.

Specifications

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	W12
Product Information
Model	W12
Category	In-wall
Dimension	86*86*32mm
Hardware
Interface	One 10/100/1000 Mbps Ethernet Port
	One 10/100/1000 Mbps Ethernet Port (PoE)
Button	1*Reset
LED Indicator	1*SYS
Maximum Power Consumption	7.3W
Power Supply	PoE 802.3af
Max. Number of Clients	256
Recommended Clients	35
Antenna Gain	3dBi
2.4GHz maximum power	18dBm
5GHz maximum power	17dBm
Reception Sensitivity	2.4GHz 802.11b -88dBm
	2.4GHz 802.11n (MCS7) - -72.5dBm
	5GHz 802.11a -92.5dBm
	5GHz 802.11n (MCS7) - -72dBm
Frequency Range	2.4GHz&5GHz
Standard&Protocol	IEEE 802.11b/g/n/a/ac(wave2)
Maximum wireless speed	2.4GHz:300Mbps
	5GHz:867Mbps
Bandwidth	20MHz/40MHz/80MHz
Software
Operating Mode	AP/Client+AP
Max. No. of SSID	2.4GHz: 6
	5GHz: 4
Hide SSID	Supported
OFDMA	Supported
Beamforming	Supported
Fast roaming(802.11k/v/r)	Supported
WEP	Supported
WPA-PSK	Supported
WPA2-PSK	Supported
WPA	Supported
WPA2	Supported
Access control	Supported
Adjustable power transmit	Supported
Automatic channel	Supported
AP isolation	Supported
Guest network	Supported
Connected clients control	Supported
RSSI Threshold	Supported
Weak signal terminal elimination	Supported
Prioritize 5 GHz	Supported
VLAN tagging for SSID	Supported
LED control	Supported
MU-MIMO	Supported
Diagnostics tool	Supported
Reboot at specified interval	Supported
Scheduled reboot	Supported
System Logs	Supported
Device management	M3 or Tenda Router with AP Controller feature
Firmware upgrade	Supported
Reboot	Supported
Reset	Supported
Backup configuration	Supported
Restore configuration	Supported
Others
Default address	192.168.0.254
Operation Temperature	-10degreesC ~ 45degreesC
Operating Humidity	10%~90% non-condensing
Storage Temperature	-30degreesC ~ 70degreesC
Storage Humidity	5%~90% non-condensing