Overview:

The INTELLINET NETWORK SOLUTIONS Pro Series Network Camera, Model 550796, is designed for security surveillance applications, and comes fully equipped with state of the art features setting it apart from other network cameras on the market today.

Features:

• 1/3" SONY Super HAD CCD image sensor for excellent image quality
• Up to 25 frames per second in all image resolutions
• Supports image resolutions up to 720 x 576 (D1)
• Audio support, full duplex, up to 3.4 kHz
• External microphone input connector
• External speaker output connector
• Terminal block for external sensors or external alarm devices
• Supports low light conditions, minimum 0.1 lux
• Supports simultaneous MPEG4 and Motion-JPEG image compression
• Supports MPEG4 video streaming with CBR (constant bit rate) and VBR (variable bit rate) modes
• Controllable frame rate
• Video access through any standard Web browser
• Supports IEEE 802.3af Power over Ethernet injectors, mid- and endspans
• Integrated HTTP Web server supporting 50 simultaneous user connections
• Supports HTTPS encryption for enhanced security
• Integrated e-mail, FTP, DDNS and DHCP client
• Integrated motion detection with pre- and post-alarm image/video buffering
• Event-triggered FTP and e-mail upload of still images and videos
• Extensive HTTP API for software integration and remote programming operations
• Including Windows-based IP Installer and Multi-Viewer software for up to 4 cameras

Superior Video Quality
Because the Pro-Series Network Camera uses a CCD sensor, it provides sharp video images with dramatic lifelike color representation.

View Images in the Dark
With low light sensitivity, the Pro-Series Network Camera can be used to monitor and record video in rooms with minimal lighting, making it ideal to use at night.

Flexible Video Formats
The Pro-Series Network Camera supports MPEG4 as well as JPEG video formats, providing superior quality and at the same time continuing to support existing applications (the law in most countries only accepts JPEG video format as evidence in court). MPEG4 on the other hand, allows you to transmit a larger amount of data over the same amount of bandwidth, while providing smooth and seamless viewing.

Bi-directional Audio Support
Attaching a microphone and loud speakers to the Pro-Series Network Camera will allow you to listen and talk using the 2-way audio support. This is ideal for most security and surveillance applications but can be applied to provide cost effective video conferencing as well.

Power over Ethernet
The Pro-Series Network Camera supports the 802.3af standard, allowing it to be installed in locations where an AC power source is not readily available. Simply plug the camera into a PoE compliant switch, and begin transmitting power as well as data over the Cat5e or Cat6 network cabling.

Specifications:

© 2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications for the product series
Product Code	550796
Standards	IEEE 802.3 (10Base-T Ethernet)
	IEEE 802.3u (100Base-TX Fast Ethernet)
	IEEE 802.3af (Power over Ethernet)
General	32-bit ARM9 RISC CPU
	16 MByte video frame buffer
	8 Mbyte flash memory
	32 Mbyte SDRAM
	Supported image resolutions: D1 (720 x 576), CIF (352 x 288)
	Audio support:
	- Full duplex
	- Bandwidth: 300 Hz to 3.4 kHz
	- Audio input: 3.5 mm / 1.8" microphone input jack
	- Audio output: 3.5 mm / 1.8" speaker output jack
	Protocols supported: TCP/IP, UDP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, RTSP, RTC
	Certifications: FCC Class B, RF: EN300328, EMC: EN301489-1/-7, Safety: EN60950-1
Image Sensor and Lens Specification	1/3" SONY Super HAD CCD sensor
	S/N ratio: > 48 dB
	Video output: 1.0 Vp-p (75 Ohms, composite)
	Automatic white balance control
	Image Control, Brightness, Contrast, Saturation, Hue
	0.1 minimum lux
	Electronic shutter: 1/50 - 1/10.000 sec.
	Replaceable standard 1/3" CS mount lens
	Focal length 6.0 mm, angular field of view 54Ëš, object distance 0.1 m to infinity
	Maximum relative aperture F1.8
LEDs	Power
	Network connection
	Camera operation
Environmental	Dimensions: 87 (W) x 158 (L) x 45 (H) mm (3.4 x 6.2 x 1.8 in.)
	Weight: 1.1 kg (2.34 lbs.)
	Operating temperature: 0 – 50°C (32 – 122°F)
	Operating humidity: 10 – 95% RH, non-condensing
	Storage temperature: 0 – 60°C (0 – 149°F)
Power	External power adapter: 12 V DC, 1.5 A
	Power consumption: 3.0 Watts (maximum)
System Requirements	Windows 2000, XP, Vista, Linux, Mac OS X
	Computer with network connection
	Web browser support:
	- MS Internet Explorer 5.0 or higher (ActiveX + Java)
	- Mozilla 1.x, Mozilla Firefox (Java)
	- Netscape Navigator 6.0 or higher (Java)
	- Opera (Java)
	- Safari (Java)
	- Konqueror (Java)
Package Contents	Pro Series Network Camera
	User manual
	External power adapter
	Software CD