Overview

CPE 210 2.4GHz 300Mbps 9dBi Outdoor CPE
The CPE210 is engineered to deliver stable long-distance wireless connectivity with a durable build suitable for demanding outdoor conditions. It offers reliable data links for homes, farms, businesses, and remote installations.

Description

This outdoor wireless device supports up to 300 Mbps speeds on 2.4GHz and integrates a 9dBi dual-polarized antenna for focused, long-range signal delivery. It is designed for multi-mode deployment, remote PoE installation, and centralized management, making it practical for point-to-point links, rural coverage, and network expansions.

Features

Key Points at a Glance

• Built-in 9dBi 2x2 dual-polarized directional MIMO antenna
• Transmission power adjustable from 0 to 27dBm
• Optimized for wireless links beyond 5km
• MAXtream TDMA improves throughput and latency for larger outdoor networks
• Central management via Pharos Control
• Multiple operating modes for flexible deployment
• Passive PoE support up to 60 meters

Hardware Built for Demanding Outdoor Environments
The unit is equipped with Qualcomm Atheros chipsets and a robust enclosure designed for long-term external use. It operates reliably in temperatures ranging from minus 40 to 70 degrees Celsius, making it suitable for harsh climates.

Antenna and Signal System
The integrated high gain antenna provides stable directional performance, supported by a metal reflector that helps reduce noise and enhance signal strength.

Long-Range Wireless Transmission
The device is tuned for extended outdoor reach and can support data transmission over distances exceeding 5km in field scenarios.

Maximized Throughput with MAXtream TDMA
Large wireless deployments often face signal competition that reduces performance. MAXtream TDMA helps organize transmission timing, minimizing collisions and supporting more consistent speeds across point-to-multipoint setups.

Central Management with Pharos Control
The included software enables administrators to discover devices, update firmware, monitor status, and perform ongoing maintenance from one workstation.

PharOS Management Interface
A browser-based control panel gives professionals detailed configuration options for fine-tuning network behavior.

Specifications

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	CPE210
HARDWARE FEATURES
Processor	Qualcomm Atheros 560MHz CPU, MIPS 74Kc
Memory	64MB DDR2 RAM, 8MB Flash
Interface	1 10/100Mbps Shielded Ethernet Port (Passive PoE in)
	1 Grounding Terminal
	1 Reset Button
Power Supply	Passive Power over Ethernet via LAN0 (+4, 5pins, -7, 8pins)
	Voltage range: 16-27VDC
Power Consumption	10.5 Watts Max
	Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
Dimensions ( W x D x H )	8.8 x 3.1 x 2.4 in.
Antenna Type	Built-in 9dBi 2x2 Dual-polarized Directional Antenna
	Beam Width: 65degrees (H-Plane) / 35degrees (E-Plane)
Protection	15KV ESD Protection
	6KV Lightning Protection
Enclosure	Outdoor ASA stabilized plastic material
	IPX5 waterproof Certification
WIRELESS FEATURES
Wireless Standards	IEEE 802.11b/g/n (with Pharos MAXtream disabled)
Proprietary Protocol	TDMA Mode (with Pharos MAXtream enabled)
Wireless Speeds	Up to 300Mbps (40MHz, Dynamic)
	Up to 144.4Mbps (20MHz, Dynamic)
	Up to 72.2Mbps (10MHz, Dynamic)
	Up to 36.1Mbps (5MHz, Dynamic)
Frequency	2.4~2.483GHz
Transmission Power	27dBm/500mw (1dBm step adjustable)
SOFTWARE FEATURES
Wireless Configurations	Pharos MAXtream TDMA Technology
	802.11b/g/n modes
	Selectable Channel Width: 5/10/20/40MHz
	Automatic Channel Selection
	Transmission Power Control
	Dynamic Frequency Selection (DFS)
	WDS Enable/Disable
	Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
	SSID Broadcast Enable/Disable
	Multi-SSID with VLAN Tagging (AP mode only)
	Distance/ACK Timeout Setting
	Wireless MAC Address Filter
	Wireless Advanced:
	> Beacon Interval/RTS Threshold/Fragmentation
	> Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management	Discovery and Remote Management via Pharos Control application
	HTTP/HTTPS Web-based management
	System Log
	SNMP Agent(v2c)
	Ping Watch Dog
	Dynamic DDNS
	SSH Server
System Tools	Wireless Signal Quality Indicators:
	Signal Strength/Noise/Transmit CCQ/CPU/Memory
	Monitors: Throughput / Stations / Interfaces / ARP / Routes / WAN / DHCP
	Spectrum Analyzer
	Speed Test
	Ping
	Traceroute
System-level Optimizations	Optimized IGMP Snooping/Proxy for multicast applications
	Hardware watch dog
POE ADAPTER FEATURES
Dimensions(W x D x H)	4.3 x 2.2 x 1.3 in
Interfaces	1 AC Jack with Earth Ground
	1 10/100Mbps Shielded Ethernet Port (Power + Data)
	1 10/100Mbps Shielded Ethernet Port (Data)
Button	Remote Reset Button
Power Status LEDs	Green
Input	100-240VAC, 50/60Hz
Output	24VDC, 0.6A Max
	+4, 5pins, -7, 8pins. (Support up to 60m Power over Ethernet)
Efficiency	> 80%
Certifications	FCC
OTHERS
Certification	FCC, RoHS, IPX5
Package Contents	Outdoor Wireless CPE
	24VDC Passive PoE Adapter
	Pole Mounting Straps
	AC Power Cord
	Installation Guide
Environment	Operating Temperature: -40degreesC~70degreesC (-40degreesF~158degreesF)
	Storage Temperature: -40degreesC~70degreesC (-40degreesF~158degreesF)
	Operating Humidity: 10%~90% non-condensing
	Storage Humidity: 5%~95% non-condensing