Overview:

The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don’t natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device.

The DPE-301GS PoE splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for PoE IN, which is the network connection and is usually connected to a remote PoE switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device.

Features:

• Converts incoming power from a PoE switch or injector to low-voltage DC power
• Ideal for non-PoE access points, IP cameras and VoIP phones
• Supports 5V, 9V and 12V via selectable switch
• Lightweight, compact and easy to install
• Supports 802.3af / 802.3at
• 10/100/1000 interface provides flexibility for all types of connections

PoE Injector and PoE Splitter Tandem
Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.

Specifications:

©2025 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	DPE-301GS
Ports	PoE and Data
	Label: PoE IN
	IEEE 802.3 / 10BASE-T
	IEEE 802.3u / 100BASE-Tx
	IEEE 802.3ab / 1000BASE-T
	IEEE 802.3af / 802.3at
	Half/full-Duplex operation
	CSMA/CD
	Data
	Label: LAN OUT
	IEEE 802.3 / 10BASE-T
	IEEE 802.3u / 100BASE-Tx
	IEEE 802.3ab / 1000BASE-T
	Half/full-Duplex operation
	CSMA/CD
Physical and Environmental	Dimensions (L x W x H)
	4.32 x 2.45 x 0.96 in. (109.8 x 62.2 x 24.5 mm)
	Weight
	3.46 ounces (98 grams)
	Temperature
	Operating: 32°F to 122°F / 0° to 50°C
	Storage: -22°F to 158°F / -30°C to 70°C
	Humidity
	Operating: 5% to 95% RH
	Storage 5% to 95% RH
	Power Consumption
	Maximum: 32.4 Watts
	LED Indicators
	Blue: Power On
	Green: Link On
DC Power Out	Switchable Output Voltage
	5V DC, 2.5A max.
	9V DC, 2A max.
	12V DC, 2A max.100 - 240V, 50/60 Hz
	Included Power Adapter Cables
	5.5mm male to 5.5mm male
	5.5mm male to 3.8mm male
PoE Features	Standards
	IEEE 802.3af, IEEE 802.3at
Emissions (EMI) and Safety Certifications	Certifications
	CE, FCC, VCCI, RCM, RoHS