HPCTW-10

Overview

Anycubic PC Filament 1kg - Translucent White
The Anycubic PC Filament 1kg in Translucent White is an engineering-grade polycarbonate filament developed for demanding 3D printing projects that require exceptional strength, impact resistance, and heat tolerance. Designed for FDM 3D printers with a recommended nozzle size of 0.2 mm or larger, it prints at temperatures between 270 and 290 Degrees C while delivering smooth, translucent prints with an attractive lustrous finish. Ideal for structural components, functional prototypes, automotive applications, electronic housings, outdoor parts, and creative projects, this high-performance filament provides the durability professionals and makers expect. For the best printing results, the filament should be dried at 80 Degrees C for 8 to 12 hours before use. It is supplied on a reusable 1kg spool and supports intelligent filament identification on compatible Anycubic printers.

Description

Built for advanced engineering applications, Anycubic PC Filament combines excellent mechanical strength with high heat resistance to produce durable, reliable parts that outperform standard consumer filaments. Its translucent white finish delivers clean-looking prints while maintaining the toughness needed for demanding environments. With compatibility for ACE-enabled systems and intelligent filament recognition on supported printers, it offers a streamlined printing experience for professionals, hobbyists, and product designers alike. Part Number HPCTW-101 makes it easy to identify this specific filament when reordering or integrating it into your workflow.

Features

Why Choose Anycubic PC Filament
Whether you are producing end-use parts or engineering prototypes, this polycarbonate filament is designed to withstand mechanical stress and elevated temperatures without sacrificing print quality. The combination of excellent impact resistance, dimensional stability, and smooth surface finish makes it suitable for applications where durability matters.

Key advantages include:

• Engineering-grade polycarbonate material for demanding applications
• High heat resistance with a heat deflection temperature of 110 Degrees C
• Tough impact-resistant prints suitable for structural components
• Smooth translucent finish with an attractive glossy appearance
• Intelligent filament identification support for compatible Anycubic printers
• Reusable spool design helps reduce tangles during printing
• Compatible with ACE systems
• Drying before use ensures optimal print quality

Printing Recommendations
For consistent and reliable results, use the recommended printing settings below.

• Recommended nozzle size: 0.2 mm or larger
• Printing temperature: 270 to 290 Degrees C
• Heated bed temperature: 100 to 120 Degrees C
• Recommended print speed: 40 to 250 mm/s
• Maximum volumetric flow rate: 12 mm3/s
• Drying requirement: 80 Degrees C for 8 to 12 hours before printing

Material Performance
This engineering filament offers an excellent balance of strength, stiffness, and thermal resistance.

• Colour: Translucent White
• Filament type: Engineering-grade Polycarbonate (PC)
• Density: 1.2 g/cm3
• Melting point: 230 Degrees C
• Vicat softening temperature: 122 Degrees C
• Heat deflection temperature: 110 Degrees C
• Tensile strength: 65 plus or minus 6 MPa
• Tensile strength (Z): 25 plus or minus 7 MPa
• Young's modulus: 2550 plus or minus 100 MPa
• Bending modulus: 2900 plus or minus 150 MPa
• Bending strength: 105 plus or minus 10 MPa
• Elongation at break: 9 plus or minus 4%
• Izod impact strength (X-Y): 30 plus or minus 12 kJ/m2
• Melt index: 15 to 20 g/10 min at 270 Degrees C and 1.2 kg

Recommended Applications
The Anycubic PC Filament is well suited to a wide range of industrial and professional printing projects, including:

• Structural parts
• Functional components
• Automotive parts
• Electronic enclosures
• Outdoor applications
• Decorative and artistic models

Package Contents

• 1 x Anycubic PC Filament 1kg - Translucent White

Product Identification
Part Number / SKU: HPCTW-101

Specifications

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	HPCTW-10
Colour	Translucent White
Dry Out Before Use	Required
Drying Condition	80 degreesC, 8-12 h
ACE Compatibility	Compatible
Nozzle Size	Recommended 0.2 mm or above
Printing Temperature	270-290 degreesC
Heated Bed Temperature	100-120 degreesC
Recommended Printing Speed	40-250 mm/s
Maximum Volume Speed (Flow Rate)	12 mm³/s
Density	1.2 g/cm³
Melt Index	15-20 g/10 min (270degreesC/1.2kg)
Melting Point Temperature	230 degreesC
Vicat Softening Temperature	122 degreesC
Heat Deflection Temperature (0.45MPa)	110 degreesC
Young's Modulus	2550±100 MPa
Tensile Strength	65±6 MPa
Elongation at Break	9±4%
Bending Modulus	2900±150 MPa
Bending Strength	105±10 MPa
lzod lmpact Strength (X-Y)	30±12 kJ/m²
Tensile Strength (Z)	25±7 MPa
Filament Type	Engineering filaments
Recommend to Print	Structural parts, functional parts, automotive parts, outdoor use, electronic housing, artworks
Intelligent Identification	Supported
Reusable Filament Spool	Supported