Overview:

The DAP-2360 is an 802.11n Plenum Rated PoE Access Point ideal for any network administrator to create or expand the capacity of their wireless network. At transfer rates of up to 300Mbps in 2.4GHz users are able to connect with legacy 802.11b/g adaptors as well as the latest 802.11n adaptors to enjoy faster downloads and instant communication.

The DAP-2360 allows network administrators to deploy a highly manageable and extremely robust 802.11n wireless network. The included antennas are detachable and provide optimal wireless coverage in the 2.4GHz (802.11g and 802.11n) band using a high power single radio design to reduce dead spots and increase capacity. Enclosed in a white plenum-rated metal chassis, the DAP-2360 color allows the access point to easily blend into ceilings or walls and adheres to strict fire codes for placement in air passageways. For advanced installations, this high-speed Access Point has integrated 802.3af Power over Ethernet (PoE) support, allowing installation of this device inareas where power outlets are not readily available.

Features:

• 802.11n 2.4GHz Single Band
• New White Plenum rated housing
• Support 802.3af PoE / Gigabit Ethernet port
• Support AP/WDS/WDS with AP/AP Client mode
• Supports Multiple SSID/VLAN
• Up to 26dbm High Power radio design
• Plenum-rated Chassis
• Support AP Manager II/AP Array/D-View/SNMP/Web/Telnet/SSH/SSL for Management

Specifications:

© 2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications for the product series
Product Code	NE-DAP2360
Standards	IEEE 802.11n
	IEEE 802.11g
	IEEE 802.3ab
	IEEE 802.3af
	IEEE 802.3u
	IEEE 802.3
Network Management	Telnet - Secure (SSH) Telnet
	Web Browser interface
	HTTP - Secure HTTP (HTTPS)
	SNMP Support
	D-View Module - Private MIB
	AP Manager II
	AP Array
Security	WPA-Personal
	WPA-Enterprise
	WPA2-Personal
	WPA2-Enterprise
	64/128-bit WEP
	SSID Broadcast Disable
	MAC Address Access Control
	Rogue AP Detection
VLAN/SSID Support	802.1q/Multiple SSID support up to 8
Quality of Service (QoS)	4 Priority Queues
	WMM Wireless Priority
Wireless Frequency Range	2.4GHz to 2.4835GHz
Operating Modes	Access Point (AP)
	WDS with AP
	WDS/Bridge (No AP Broadcast)
	Wireless Client
Dipole Antenna Gain	5 dBi @ 2.4 GHz
Maximum Transmit Output Power	26 dBm @ 2.4 GHz Dual Chain
LEDs	Power
	LAN
	2.4GHz
Maximum Power Consumption	9 Watts with PoE
	8 Watts without PoE
Operating Voltage	48VDC +/- 10% for PoE or 5V/2.5A
Temperature	Operating: 32°F to 104°F (0°C to 40°C)
	Storing: -4°F to 149°F (-20°C to 65°C)
Humidity	Operating: 10% ~ 90% (Non-condensing)
	Storing: 5% ~ 95% (Non-condensing)
Certifications	FCC class B
	IC
	UL 2043
	WiFi
Weight	1.69 lb (768g)
Dimensions (WxHxD)	6.5" x 7.4" x 1.5" (166mm x 188mm x 37mm)