| Overview |
| In the Box | (1) Door Hub |
| (1) G3 Reader Pro |
| (1) G3 Reader |
| (2) Pocket Keyfobs |
| Touch Pass | 10 free 1-year Touch Passes included |
| Door Hub |
| Dimensions | 174.9 x 126 x 32.9 mm |
| (6.9 x 5 x 1.3") |
| Supported Doors | 1 |
| Input Terminals | (2) Door exit request |
| (1) Door position |
| (1) Emergency |
| Power Method | PoE++ |
| UL 294 Power-limited Class 2 PSU |
| UL 60950-1/62368-1 LPS/PS2 PSU |
| UL 294 Level | Destructive attack: Level I |
| Line security: Level I |
| Endurance: Level I |
| Standby power: Level I |
| Weight | 363 g (12.8 oz) |
| Enclosure Material | Polycarbonate |
| Mount Material | Polycarbonate |
| Mounting | DIN-rail (Included) |
| Ambient Operating Temperature | 0 to 40° C (32 to 104° F) |
| Ambient Operating Humidity | 5 to 95% noncondensing |
| Networking Interface | (5) 10/100/1000 Base-T |
| PoE Interface | (1) PoE++ input, 50V DC, 1A |
| (4) PoE outputs, 50V DC, 15.4W per port (Max. 28W aggregated) |
| Max. Power Consumption | 30W (Without PoE output) |
| 50W (With PoE output) |
| Digital Input | Request to exit, request to enter, remote release, door position sensor |
| Dry Output Relay | Lock: 30V DC, 1A |
| Aux: 30V DC, 1A |
| Powered Output Relay | Lock: 12V DC, 1A |
| Aux: 12V DC, 0.33A |
| 12V DC, 0.33A |
| LEDs | B/W Learn More |
| Button | (1) Factory-reset |
| Recommend Max. Cable Length | UA-Lock-Electric |
| (400mA) |
| 24 AWG length: 25 m (82 ft) |
| 22 AWG length: 42 m (138 ft) |
| 20 AWG length: 66 m (217 ft) |
| 18 UACC-Cable-DoorLockRelay length: 100 m (328 ft) |
| UA-Lock-Magnetic-540kg (500mA) |
| 24 AWG length: 20 m (66 ft) |
| 22 AWG length: 32 m (105 ft) |
| 20 AWG length: 51 m (167 ft) |
| 18 UACC-Cable-DoorLockRelay length: 80 m (262 ft) |
| UA-Lock-Magnetic-270kg (800mA) |
| 24 AWG length: 12 m (29 ft) |
| 22 AWG length: 20 m (98 ft) |
| 20 AWG length: 30 m (167 ft) |
| 18 UACC-Cable-DoorLockRelay length: 46 m (151 ft) |
| Other locks |
| (1A) |
| 24 AWG length: 9 m (30 ft) |
| 22 AWG length: 15 m (49 ft) |
| 20 AWG length: 24 m (79 ft) |
| 18 UACC-Cable-DoorLockRelay length: 36 m (118 ft) |
| PoE Cabling Requirements | Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. |
| The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords , 24 AWG (0.21 mm² ) for horizontal or riser cable. |
| UL 294 Statement | Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. |
| The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: 1 |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number, and issue date and/or revision level | UA-Hub-Door002, V01 |
| G3 Reader Pro |
| Dimensions | 160 x 40.4 x 40.55 mm |
| (6.3 x 1.59 x 1.6") |
| Integrated Camera | ✓ |
| NFC Card & Keyfob Access | ✓ |
| PIN Access | ✓ |
| Apple/Google Wallet | ✓ |
| Mobile Unlock | ✓ |
| Two-Way Intercom & Doorbell Access | ✓ |
| Weatherproofing | IP55 |
| NDAA Compliant | ✓ |
| UL 294 Level | Destructive attack: Level I |
| Line security: Level I |
| Endurance: Level I |
| Standby power: Level I |
| Weight | 136 g (4.8 oz) |
| Enclosure Material | Polycarbonate, glass |
| Mount Material | Aluminum alloy |
| Mounting | Wall, gang-box mount (Included) |
| Angle mount, junction box (Optional) |
| Indoor and Outdoor Use | ✓ |
| Ambient Operating Temperature | Device: -30 to 45° C (-22 to 113° F) |
| Display: -10 to 45° C (14 to 113° F) |
| Ambient Operating Humidity | 5 to 90% noncondensing |
| Networking Interface | (1) GbE RJ45 port |
| Connectivity | BLE 4.2 |
| NFC |
| Power Method | PoE |
| UL 294 Power-limited Class 2 PSU |
| UL 60950-1/62368-1 LPS/PS2 PSU |
| Max. Power Consumption | 6W |
| Supported Voltage Range | 48V DC |
| ESD/EMP Protection | Air: ±15kV, contact: ±8kV |
| Sensors | Proximity sensor |
| Display | 120 mm (4.7") diagonal |
| Touch Screen Technology | Capacitive touch |
| Display Luminance | 480 nits (Typical) |
| Screen Orientation | Portrait |
| Resolution | 1280 x 286 px |
| Microphone | ✓ |
| Speaker | (1) Yes, 1.5W |
| LEDs | R/G/B/W/Amber Learn More |
| Button | (1) Factory-reset |
| NFC Frequency | 13.56 MHz |
| NFC Read Range | < 30 mm (1.18'') |
| NFC Technology | ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) |
| MIFARE Classic / MIFARE DESFIRE |
| Sony FeliCa (ID only) |
| NFC Forum tags T1T, T2T, T3T, T4T and T5T |
| ECP 2.0 |
| PoE Cabling Requirements | Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. |
| The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords , 24 AWG (0.21 mm² ) for horizontal or riser cable. |
| UL 294 Statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294. |
| The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: I |
| Certifications | CE, FCC, IC,UL 294, CAN/ULC-60839-11-1 |
| Document number, and issue date and/or revision level | UA-G3-Pro-W/UA-G3-Pro-B, V01 |
| G3 Reader |
| Dimensions | 93 x 40 x 36.5 mm |
| (3.7 x 1.6 x 1.4") |
| NFC Card & Keyfob Access | ✓ |
| Apple/Google Wallet | ✓ |
| Mobile Unlock | ✓ |
| Handwave Request to Exit | ✓ |
| Weatherproofing | IP55 |
| NDAA Compliant | ✓ |
| UL 294 Level | Destructive attack: Level I |
| Line security: Level I |
| Endurance: Level I |
| Standby power: Level I |
| Weight | 82 g (2.9 oz) |
| Enclosure Material | Polycarbonate, glass |
| Mount Material | Aluminum alloy |
| Mounting | In-wall, gang box (Included) |
| Junction box (Optional) |
| Indoor and Outdoor Use | ✓ |
| Ambient Operating Temperature | -30 to 45° C (-22 to 113° F) |
| Ambient Operating Humidity | 5 to 90% noncondensing |
| Networking Interface | (1) 10/100 MbE RJ45 port |
| Connectivity | BLE 4.1 |
| NFC |
| Power Method | PoE |
| UL 294 Power-limited Class 2 PSU |
| UL 60950-1/62368-1 LPS/PS2 PSU |
| Max. Power Consumption | 5W |
| Supported Voltage Range | 48V DC |
| ESD/EMP Protection | Air: ±15kV, contact: ±8kV |
| Sensors | Proximity sensor |
| Speaker | (1) Yes, 0.7W |
| LEDs | R/G/B/W Learn More |
| Button | (1) Factory-reset |
| NFC Frequency | 13.56 MHz |
| NFC Read Range | < 30 mm (1.18'') |
| NFC Technology | ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) |
| MIFARE Classic / MIFARE DESFIRE |
| Sony FeliCa (ID only) |
| NFC Forum tags T1T, T2T, T3T, T4T and T5T |
| ECP 2.0 |
| PoE Cabling Requirements | Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. |
| The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords , 24 AWG (0.21 mm² ) for horizontal or riser cable. |
| UL 294 Statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294. |
| The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number, and issue date and/or revision level | UA-G3, V01 |
| Pocket Keyfob |
| Dimensions | 84 x 39 x 7.4 mm |
| (3.3 x 1.5 x 0.29") |
| Weight | 16 g (0.56 oz) |
| Enclosure Material | Polycarbonate, stainless steel, silicone rubber |
| Weatherproofing | IP54 |
| NDAA Compliant | ✓ |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| Ambient Operating Temperature | -10 to 45° C (14 to 113° F) |
| NFC Frequency | 13.56 MHz |
| NFC Technology | ISO/IEC 14443 Type A |
| MIFARE DESFire EV3 4K |
| UniFi Access Proprietary Security Protocol |
| Certification | CE |
Up
Down
Mobile store
