Features:

Ultimate Wireless broadband technology
ZyXEL’s MAX308M supports state-of-the-art WiMAX technologies like Maximum Ratio Combining (MRC), MIMO Matrix A and B and beamforming that enable superior radio performance and extensive radio coverage.

Software upgrade over the air
Through the WiMAX radio interface, the MAX308M supports TR-069 and OMA-DM that are fully configurable and software upgradeable through events triggered by the operators.

Standard 802.3af PoE
The MAX308M can be connected with a standard 802.3af compliant for easy Installation.

Built-in high-gain MIMO antenna
The MAX308M provides integrated cross-polarized antenna for easy installation and high performance in different environments.

Advanced IP networking features
The MAX308M supports advanced IP networking functionalities, including Bridge and NAT Router features needed to access the Internet and Firewall security to protect the Internet access activities.

Easy-to-install antenna alignment
The MAX308M features visible LED bars showing the WiMAX radio signal strength for easier antenna alignment; it also has a built-in buzzer to help alignment if the LED bars are hard to see under direct sunlight. The included flexible mounting kit is suitable for different environments and supports easy adjustment of direction and position.

Specifications:

© 2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications for the product series
Product Code	ZYXEL MAX308M
WiMAX Air Interface	Reference standard: IEEE 802.16e-2005 SOFDMA / TDD
	Frequency: 2.500-2.700GHz
	Channel Bandwidth 5 / 7 / 10 MHz
	DL Modulation: QPSK, 16QAM, 64QAM
	UL Modulation: QPSK, 16QAM
	FEC: CC, CTC
	Maximum output power at antenna port: Typical 26dBm
	Sensitivity: -96dBm @ QPSK 1/2
	Aggregate throughput Up to 25 Mbps
	Internal cross-polarized antenna: Antenna gain 13dBi
	QoS : BE, UGS, rtVR, nrtVR, ertVR
	Security: PKMv2, EAP-TLS, EAP-TTLS
	CHAP/PAP/MSCHAP/MSCHAPv2
	CMAC message authentication
	CCM mode 128-bit AES data ciphering
	Idle mode, Sleep mode
	BS-initiated scanning and reporting
	Network Initiated HO (NIHO)
	ARQ, HARQ
ND&S	Auto selection / User selection
	Online subscription
Roaming	HOME NSP lock
	EAP roaming ID
	CAPL / RAPL Configuration
IP Networking	Supports Bridge and NAT Router mode
	LAN to WiMAX QoS classification
	Firewall with SPI
	Content Filtering
	Major ALG (SIP/FTP/H.323)
	DHCP client/server
Management	FTP/HTTP Firmware Upgrade
	Web-based/SNMP/Telnet/SSH Management
	Over-the-Air (OTA) firmware upgrade by TR-069 or OMA-DM
Hardware Specifications	The Pole-mounting & Wall-mounting kits
	One RJ-45 port to connect PoE cable with Indoor unit
	WiMAX connection status LEDs
	Rated for outdoor weather environment including ultraviolet sun radiation
	One Ethernet connector: 10/100 BaseT Auto MDI/MDIX (RJ-45 plug)
	Standard 802.3af PoE
	LED: Power indication
Power Specification	Average power consumption at peak: 15 W
Physical Specifications	Item dimensions (WxDxH): 255 x 255 x 55 mm (10.04" x 10.04" x 2.16")
	Item weight: 1071 g (2.36 lb.)
	Packing dimensions (WxDxH): 390 x 338 x 120 mm (15.35" x 13.31" x 4.72")
	Packing weight: 2460 g (5.42 lb.)
Environmental Specifications	Operation temperature: -40°C to 60°C (40°F to 140°F)
	Operation humidity: 10% to 90% (Non-condensing)
	Storage temperature: -40°C to 65°C (-40°F to 149°F)
	Storage humidity: 10% to 95% (Non-condensing)
Certification	FCC certification
	Water Tightness: IEC529 / IP65
	WiMAX Forum Wave II Compliance